GE H
EALTHCARE
D
5305880-100, R
IRECTION
Section 8-6 Fan Assembly
8-6-1
Disassembly/Assembly of Fan
Follow steps below and refer Figure 8-12. For FRU Details refer
1.) Remove Top Cover. Refer 8-2.
2.) Remove 2 screws (a,d) and loosen screws b,c from the chassis.
3.) Remove the connector (e) on the power distributor board which is connected to the fan.
4.) Remove Fan assembly from the unit.
5.) For assembly follow the reverse order.
.
Figure 8-12 Disassembly/Assembly of Fan
Service Manual
Table 8-9 Functional tests
Page 8-20
Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 4 9 o f 1 9 7
3
EVISION
Functional Test/ Diagnostic Test
Section
4-2-1
Power ON/ Boot up
4-2-1
Power OFF/ Shut down
4-3
Functional Checks
Section 8-6 - Fan Assembly
LOGIQ™ 100 PRO S
ERVICE
Debrief Script
Service manual direction 5305880-100,
Section 8-6-1.Equipment passed all
required tests and is ready for use.
M
ANUAL