Using The Mouse And Front Panel; Using The Mouse; How To Select A Channel And Enable Its Audio; Opening The Osd Root Menu - EverFocus PARAGON 264x1 User Manual

16ch dvr

Table of Contents

2 USING THE MOUSE AND FRONT PANEL

This DVR supports multiple methods of control. It can be controlled with a mouse, the front panel buttons, an EKB500

keyboard, and the included handheld IR remote control.

This chapter will cover doing the basic control functions with the mouse and the front-panel buttons.

1. In a screen layout that shows more than one channel, users can select a channel by clicking once on the desired

channel's viewing square. The selected square will be highlighted by a white frame.

2. Double-clicking on a channel square will make it display in full screen. Double-click again to go back to multi-channel

display.

3. This DVR has only one Audio Out line. To assign the audio feed of a specific channel to the Audio Out line, click the

Audio icon (

increase, indicating that a different channel's audio feed has been assigned to the Audio Out line (an audio icon will

also be displayed in that channel's view box.). You can only listen to the audio feed of the channel whose number is

displayed on the icon. After it reached number 16, if you click the audio icon again it will display a red line through it,

meaning that Audio Out has been switched off. If you click the icon again, it will start at number one again and the

process can be repeated.

1. Right-click the mouse to open the DVR's menu bar (see the screenshot below). When you move the mouse over each

icon, its title will be displayed at the top of the control bar.

OSD Root Menu:

2. Click on any icon to perform that action or open that submenu. These actions are covered in detail in Chapter 3.

3. Click the "X" in the top-right corner to close the DVR's menu bar.

) at the lower left side of the screen. Every time you click this icon, the number in the icon will

Chapter

Table of Contents