Channel - EverFocus TUTIS-16F3 User Manual

4.1.3

Channel

In this menu, you can set up the channel name, image quality and privacy zones for each channel.
You can also set up the protocol, baud rate and the ID for the connected PTZ cameras.
【Video Channel】：Select a camera channel.
【Channel Name】：Click on the channel name field, the on-screen keyboard appears. Click the
123 / ABC / abc / *#! on the right side of the on-screen keyboard to switch between the input
characters. Click
If the PTZ cameras have been connected to the DVR, the following settings have to be configured
to enable the PTZ Control function through the DVR.
【PTZ Protocol】：Select a protocol for the DVR to communicate with the PTZ camera.
【PTZ Baud Rate】：Select a baud rate of the connected PTZ camera.
【PTZ ID】：Select the PTZ ID (0 ~ 255). The selected ID address should correspond to the ID
address set up on the PTZ camera.
【Color Setup】 ：Click to set up the Brightness, Contrast Ratio, Saturation and Hue for the selected
channel.
【Position】：Click to bring up the Image Delay menu for adjusting the position of the image on
the channel.
【Privacy Zone】：You can set up multiple Privacy Masks to block out sensitive areas from view.
to hide the on-screen keyboard or to delete a character.
23
TUTIS Series DVR