Interface Options - ATTO Technology FastStream VT 5300 Installation And Operation Manual

The best way to manage, monitor and configure the FastStream VT is to use the ExpressNAV interface,
but you may use a terminal emulation program or Telnet.
The ExpressNAV interface is the preferred
method to operate and manage the FastStream
VT. However, it may be necessary to use other
methods to access the FastStream VT, such as to
change the user name and password (refer to
Customize the user name, password
13).
Use the ExpressNAV interface
Use the ExpressNAV interface to manage,
monitor and configure the unit. The choices you
make lead you from screen to screen. Choices
which are not available are greyed out.
1 Working from the computer attached to the
FastStream VT Ethernet port, open your
browser and type in the FastStream VT IP
address as noted in
page 5.
2 Your browser points to the FastStream VT
splash screen. Click on Enter here...
3 Type in the user name and password values.
27
ATTO Technology Inc. FastStream VT 5300 Installation and Operation Manual

6.0 Interface options

on page
Discover the IP address
CAUTION CAUTION
Changing parameters other than those
offered in the ExpressNAV interface may
cause loss of data and/or disruption to
performance and reliability of the
FastStream.
Note
The default values are user name: root and
password: Password. The user name is case
insensitive and the password is case sensitive
The pages which next appear depend on whether
or not you have begun configuring the FastStream
VT. Refer to Configure Virtual Tape
on
on page 7.