Customize Other Parameters Using The Advanced Cli Page; Discover, Manage Other Atto Devices; Create A Name For Your Faststream - ATTO Technology FastStream VT 5300 Installation And Operation Manual

Customize other parameters using the Advanced CLI page

Changes to other parameters may be made using
the Advanced page.
CAUTION CAUTION
Do not use this page unless you are
directed to by an ATTO technician.
Changing parameters may cause loss of
data and/or disruption to performance and
reliability of the FastStream.
Note
The ExpressNAV interface is the preferred
method to manage the FastStream.
1 If you are not already in the ExpressNAV
interface, type the IP address of your appliance,
as found in Use the ExpressNAV interface
page 27, in a standard browser, click Enter
Here and type in your user name and
password.

Discover, manage other ATTO devices

If you have other ATTO devices in the same
broadcast domain with no routers between them,
and any switches between this FastStream VT and
the other devices are configured to forward UDP
broadcast messages, you may physically identify
these devices and manage them from within the
browser you are currently using.
1 If you are not already in the ExpressNAV
interface, type the IP address of your appliance,
as found in Use the ExpressNAV interface
page 27, in a standard browser, click Enter
Here and type in your user name and
password.
2 The Monitor VTL page appears. In the left-
hand menu, click on the Manage VTL menu
item on the left side of the screen.
3 Click on the Other Devices arrow.
2 The Monitor VTL page appears. In the left-
hand menu, click on the Advanced menu item
on the left side of the screen.
3 The Advanced CLI Configuration page
appears. Wait for the Ready
in the CLI command in the text box provided.
Refer to CLI provides an ASCII-based interface
on page vii of the Appendix.
4 Click the Submit button: this is equivalent to
typing in the CLI command into a telnet or serial
port CLI session.
A text field beneath the box lists the most recent
commands issued to the FastStream through this
page. If you enter an incorrect parameter, the CLI
help text is displayed, showing the parameters
on
available. An asterisk next to the Ready prompt
indicates you must type SaveConfiguration
restart in the text box for changes to take effect.
4 Click Next.
5 Click on the Rescan button
6 Select a device from the list.
• Press the Identify button to activate a blinking
LED on the selected product. Click on the listed
device again to stop the blinking LED.
• Click on the device from the list and click on the
Launch in Browser button to view the device's
management console.
on

Create a name for your FastStream

You may wish to name your FastStream VT if you
are going to manage several ATTO devices from
one browser.
1 Click on Set Appliance Name.
2 Click on Next
3 Enter the name in the text box provided on the
System Configuration page
4 Click Commit
prompt, then
type
14