Atto Fibrebridge Supports Diverse San Needs - ATTO Technology FibreBridge 1190E Installation And Operation Manual

2 ATTO FibreBridge supports diverse SAN needs

The ATTO FibreBridge
embedded board, a stand alone enclosure that can be fitted for rackmount integration, or a desktop unit,
depending on the model and your needs.
The ATTO FibreBridge family of products share
common configuration options and functions to
provide the most versatile connectivity options
available. Each product has been engineered to
address specific customer needs. New capabilities
are integrated into products throughout the
FibreBridge family as much as possible, requiring
only an upgrade of firmware to incorporate them
into your SAN (see Chapter 9). To make sure you
Quick start instructions for the FibreBridge 1190E
The ATTO FibreBridge 1190E offers a variety
of ways to connect into a SAN. The following is
a quick start description:
1 Place the FibreBridge 1190E where you
want it. (See Chapter 3)
2 Connect the SCSI devices to the
FibreBridge. (See Chapter 4)
3 Connect the FibreBridge to your SAN:
attach short wave optical cables into the
Fibre Channel port on the FibreBridge. (See
Chapter 5)
3 ATTO Technology FibreBridge 1190E Installation and Operation Manual
TM family of products provides a Fibre Channel-to-SCSI bridge available as a
have the most up-to-date version of the firmware,
visit the ATTO Technology website,
www.attotech.com.
All ATTO FibreBridge models include full duplex
mode, Class 2 transfers, Intermix transfers and
direct fabric connect capabilities.
Please refer to the Technical Specifications for
complete information about your FibreBridge
model.
4 Connect to the management (services) port
via the RS-232 serial port or Ethernet. (See
Chapter 7)
5 Map your devices to the appropriate
FibreBridge Fibre Channel port. (See
Chapter 6 and Chapter 7.1.2)
6 Boot the computers on the SAN and
configure the devices connected to the
FibreBridge.