Removing The Transport Sheet Metal Fasteners - Huawei NetCol5000-A021 User Manual

NetCol5000-A021 In-row Air Cooled Smart Cooling
Product
User Manual (208 V)

3.6 Removing the Transport Sheet Metal Fasteners

Context


Procedure
Step 1 Open the door lock using a key, and open the rear door.
Step 2 Loosen the two transport fixing bolts at the bottom corners of the compressor using a 13#
socket wrench, take out the sheet metal fasteners under the bolts, and then tighten the bolts to
a recommended torque of 13 N· m using a torque wrench, as shown in
Store the removed sheet metal fasteners. They should be reinstalled if the equipment needs to
be transported in future.
Issue 03 (2020-01-10)
When moving a cabinet, take measures to prevent it from toppling.
The two compressor sheet metal fasteners and one liquid level detector sheet metal
fastener installed for transport protection must be removed. Otherwise, the equipment may
fail to work properly.
Copyright © Huawei Technologies Co., Ltd.
3 Installation Guide
Figure 3-18.
44