General Information; Validity Of The Operating Instructions; Declarations Of Conformity - Soyer BMS-9 Operating Instructions Manual

1 General information

These operating instructions contain important information and requirements for the
operation of the devices. Keep the operating instructions in a readily accessible location
close to the devices.
In these operating instructions, the term "devices" refers to the stud welding device and
the stud welding gun.
Carefully read the operating instructions and any other documents contained in the
technical documentation. Pay particular attention to the safety instructions which are
intended to help you recognise any possible residual risks and prevent hazards.
The drawings and illustrations in these operating instructions are for illustrative
purposes and may vary slightly from the actual equipment.
The manufacturer reserves the right to make technical changes.
1.1

Validity of the operating instructions

These operating instructions apply to the following devices:
Stud welding devices
Stud welding guns
1.2

Declarations of conformity

The devices are designed and constructed in accordance with the general accepted
codes of practice.
Please note that significant changes to the device will cause the declaration of
conformity to become void.
Furthermore, the manufacturer's warranty may be rendered invalid.
5
BMS-9
BMS-9V
PS-9
PS-9K
PS-1K
Operating instructions Soyer Bolzenschweißtechnik