Table of Contents
Advertisement
task list
To display a list of one or all tasks running on the currently opened
controller, use the task list command. A task is an operation
that occurs only on the controller, asynchronous to all other
operations. Clearing a disk, creating a file system, and creating a
mirror set are examples of tasks done on the controller.
The command displays an appropriate message if there are no
tasks running on the controller.
Syntax
task list [/all{=boolean}]
Parameters
{integer}
Specifies the task ID for the task whose information you want
to display. You need to perform a task list /all to
display all tasks and their associated IDs.
Switches
/all{=boolean}
Specifies whether to display all currently running tasks. If
you set this switch to TRUE, the command displays a list of all
tasks running on the currently opened controller.
This switch defaults to FALSE if you specify the integer
parameter; otherwise, the switch defaults to TRUE.
Examples
The following example shows typical output as a result of using
the task list command.
AAC0> task list
Executing: task list
Controller Tasks
TaskId
Function
------
--------
101
Scrub
Done%
Array
------ ---------
24.6%
0
State
Specific1 Specific2
-----
---------
SUS
00000000
task Commands
--------
00000000
8-2
Advertisement
Table of Contents
