Table of Contents
Advertisement
diagnostic dump text
To display diagnostic information on the console display for use by
technical support during bug reporting, use the diagnostic
dump text command.
Caution:
!
technical support.
Notes
Before using this command in DOS, verify that the window is set to
scroll data. For details, refer to your DOS documentation.
Before using this command on other operating systems, you might
want to make sure your windowing system is set up to scroll data.
See your operating system documentation.
You might also want to use the logfile start command to make
sure the diagnostic-related information gets sent to the logfile.
Syntax
diagnostic dump text
Examples
The following example displays diagnostic information on the
console display:
AAC0>diagnostic dump text
Executing: diagnostic dump text
Partitions:6
The command displays a variety of information in table format. It
also displays:
*** HISTORY BUFFER FROM LAST RUN ***
[00]:
*** HISTORY BUFFER FROM CURRENT CONTROLLER RUN ***
[00]:
==============
Dump Complete.
Use this command only under the direction of
diagnostic Commands
6-4
Advertisement
Table of Contents
