Table of Contents
Advertisement
As the example shows, the power supply status display contains
the following columns:
I
Enclosure
I
Power
I
State
I
Status
The following sections describe the information that the
enclosure show power command can display in these
columns.
The Enclosure and Power Columns
The Enclosure column displays the ID associated with the
enclosure management device that you specified on the command
line. If you did not specify an ID, the enclosure show power
command displays the IDs for all enclosure management devices
connected to the controller. In the example, 0 is specified.
The Power column displays the unit number associated with the
power supply that you specified on the command line. If you did
not specify a unit number, enclosure show power command
displays the unit numbers for all power supplies on the enclosure
management device or devices. In the example, there is one power
supply (unit 0) each on enclosure management devices 0 and 1.
The State and Status Columns
The State column displays the state and the Status column
displays the status of the power supply. Specifically, the column
can display the items listed in
Status
ON
OFF
Table
Table 9-5 State and Status Columns
State
OK
OK
9-5.
Meaning
The power supply is on and
operational. In the example, power
supply 0 on enclosure management
device 0 has these values.
The power supply is off and
operational. In the example, power
supply 0 on enclosure management
device 1 has these values.
enclosure Commands
9-30
Advertisement
Table of Contents
