arcconf task
Performs a task on a logical drive or a physical drive.
Syntax
ARCCONF TASK
TASK START <Controller#> LOGICALDRIVE <LogicalDrive#> <options> [noprompt]
TASK STOP
<Controller#> LOGICALDRIVE <LogicalDrive#>
TASK START <Controller#> DEVICE <Channel> <ID> <options> [noprompt]
TASK STOP
<Controller#> DEVICE <Channel> <ID>
Parameters
Controller# is the controller number
LogicalDrive# is the number of the logical drive in which the task is to be performed
Logical drive options:
●
verify_fix (Verify with fix)—verifies the logical drive redundancy and repairs the drive if
●
bad data is found.
verify—verifies the logical drive redundancy without repairing bad data.
●
clear—removes all data from the drive.
●
Physical device options:
●
verify_fix—verifies the disk media and repairs the disk if bad data is found.
●
verify—verifies the disk media without repairing bad data.
●
clear—removes all data from the drive.
●
initialize—returns a drive to the READY state (erases the metadata).
●
secureerase [password]—removes all data from the drive in a secure fashion to prevent
●
any possible recovery of the erased data. See
about setting the password.
Example
ARCCONF TASK START 1 LOGICALDRIVE 1 VERIFY
ARCCONF TASK START 1 DEVICE 0 0 INITIALIZE
Chapter 2: Using the Command Line Utility
arcconf atapassword on page 12
27
●
for details