Table of Contents
Advertisement
/label{=string}
Specifies a label to be assigned to the newly created volume
set. You can specify a maximum of sixteen characters for the
label.
If you do not specify the switch, it defaults to no label. If you
do not specify a label, you can do so later by using the
container set label command.
Note that this label is not the label that displays in Windows
Explorer. The label displayed by Windows Explorer comes
from the label specified with the container format
command.
Examples
Before creating a volume set, use the disk show space
command to obtain information about the available SCSI devices,
as in the following example:
AAC0>disk show space
Executing: disk show space
Scsi C:ID:L Usage
----------- --------- -------------
0:00:0
Free
0:01:0
Free
0:02:0
Free
0:03:0
Free
0:04:0
Free
0:05:0
Free
0:06:0
Free
0:08:0
Free
The example list shows that there are eight SCSI disks available to
create the volume set.
The following example creates a volume set on SCSI disk
with a freespace of 15 MB:
AAC0>container create volume ((0,2,0), 15M)
Executing: container create volume ((CHANNEL=0,ID=2,LUN=0),15,728,640)
container 0 created
On UNIX systems, the message displayed after you execute the
container create volume command includes the root special
file associated with the newly created volume set.
Size
64.0KB:
11.0MB
64.0KB:
11.0MB
64.0KB:
49.0MB
64.0KB:
49.0MB
64.0KB:
49.0MB
64.0KB:
49.0MB
64.0KB:
11.0MB
64.0KB:
11.0MB
container Commands
(0,2,0)
3-34
Advertisement
Table of Contents
