Viewing Task Progress - Adaptec 2110S User Manual

Viewing Task Progress

When Storage Manager Pro starts a task such as creating an array
(see Understanding Array Creation on page 6-6) or zeroing a drive, a
small progress bar is displayed next to the affected device or array in
the System Browser window. While the task is running, you can:
I See more detailed task progress. See the steps that follow.
I
Terminate the task. See Terminating a Task on page 6-6.
Some tasks take only a few seconds or less to complete. These tasks
do not last long enough to show task progress.
To see detailed task progress:
1
In the System Browser window, select the array, disk drive, or
other device that is affected by the task.
2
In the Details pane, click the Tasks tab.
The Tasks tab shows detailed information about any task that
is running that affects the selected device or array. The Caution
icon may show that a task is running on the selected array or
device, or that the array or device may not be ready for use.
When a task is running, some functions may not be available for the
selected array or device. The buttons for unavailable functions are
gray.
Monitoring System Status
6-5