Table of Contents
Advertisement
The Threshold Column
The Threshold column displays the temperature at which an alarm
will be sounded if the temperature goes above the threshold. In the
example, the temperature threshold is 120 degrees Fahrenheit. You
can change the temperature threshold by using the enclosure
set temperature command.
The Status Column
The Status column displays the status of the temperature
displayed in the Temperature column. The enclosure show
temperature command can display the temperature status
values listed in
Status
NORMAL
ABNORMAL
Related Commands
enclosure commands:
I
enclosure list
I
enclosure set temperature
I
enclosure show status
Table
9-9.
Table 9-9 Temperature Status Values
Meaning
The temperature is within the normal range for this
temperature sensor. In this case, the enclosure
management device does not send an alarm. This is
the value that appears in the example.
The temperature exceeds the normal range for this
temperature sensor. In this case, the enclosure
management device may send an alarm.
(page
9-6)
(page
(page
9-36)
enclosure Commands
9-24)
9-43
Advertisement
Table of Contents
