Table of Contents
Advertisement
Examples
The following example shows how to list nondetailed information
about all arrays on the system:
AAC0>container list
Executing: container list
Num
Dr Label Type
-- ----- ------ ------ --- ------ ------- ------ -------------
0
Volume 15.0MB
1
Stripe 45.0MB
The detailed container list display contains the previous
columns of information plus the following columns:
I
State
I
RO
I
Lk
I
Task
I
Done%
I
Ent
I
Creation Date
I
Creation Time
I
Boot Device
I
System Files
The following sections provide brief descriptions of each
container list column.
The Dr Column
In Windows, this column displays a blank space if you did not
assign a drive letter to the array. Otherwise, the column contains
the letter associated with the array. Use the container assign
drive_letter command to assign a drive letter to an array.
The Dr column does not appear in UNIX or NetWare systems.
The Num Label Column
This column displays the container ID (a number from 0 to 63
inclusive). Typically, the CLI container create-related
commands automatically assign an ID to an array. However, you
can renumber an array with the container move command.
Total
Oth Stripe
Size
Ctr Size
32KB
Scsi
Usage
C:ID:L Offset:Size
None
0:02:0 64.0KB:
None
0:02:0 15.0MB:
0:03:0 64.0KB:
0:04:0 64.0KB:
container Commands
Partition
15.0MB
15.0MB
15.0MB
15.0MB
3-51
Advertisement
Table of Contents
