Table of Contents
Advertisement
enclosure list
To display the list of components associated with one or all SAF-TE
enclosure management devices connected to the controller, use the
enclosure list command.
Syntax
enclosure list [/all{=boolean}] [/full{=boolean}]
[{enclosure}]
Parameters
{enclosure}
Specifies the ID associated with the enclosure management
device whose associated components you want to display.
For this version, the controller supports a maximum of eight
enclosure management devices on each bus.
Switches
/all{=boolean}
Specifies whether to display the components for all currently
connected enclosure devices. If you set this switch to TRUE,
the command displays a list of all enclosure devices
connected to the controller and their associated components.
This switch defaults to FALSE if you specify a unit number;
otherwise, the switch defaults to TRUE.
/full{=boolean}
Specifies whether to display detailed component information.
If you specify TRUE, the command displays detailed
component information. If you specify FALSE, the command
displays non-detailed component information.
This switch defaults to FALSE.
enclosure Commands
9-6
Advertisement
Table of Contents
