Table of Contents
Advertisement
diagnostic clear boot_parameters
To clear all boot-time parameters contained in the currently opened
controller's parameters, use the diagnostic clear
boot_parameters command. Under normal conditions, no boot-
time parameters are set.
Caution:
!
technical support.
Syntax
diagnostic clear boot_parameters
Examples
The following example clears all boot-time parameters:
AAC0> diagnostic clear boot_parameters
Executing: diagnostic clear boot_parameters
All boot time parameters cleared to default values.
Related Commands
diagnostic commands:
I
diagnostic set boot_parameter
I
diagnostic show boot_parameter
Use this command only under the direction of
diagnostic Commands
(page
6-11)
(page
6-12)
6-2
Advertisement
Table of Contents
