diagnostic set boot_parameter
To set boot-time parameters that a technical support representative
might need, use the diagnostic set boot_parameter
command.
Caution:
!
technical support.
Syntax
diagnostic set boot_parameter
Parameters
{string}
Specifies the name of the boot-time parameter to be set. If you
need to use this command, a technical support representative
will tell you the name of the boot-time parameter to use.
{integer}
Specifies the value for the boot-time parameter specified in
the string parameter. If you need to use this command, a
technical support representative will tell you the value to use.
Related Commands
diagnostic commands:
I
diagnostic clear boot_parameters
I
diagnostic show boot_parameter
Use this command only under the direction of
diagnostic Commands
(page
6-2)
(page
6-12)
6-11