Examples
The following example displays the status of all device slots on
enclosure management devices 0 and 1:
AAC0>enclosure show slot
Executing: enclosure show slot
Enclosure Slot scsiId Insert
--------- ---- ------ ------- -----------------------------------
0
0
0:00:0
0
1
0:01:0
0
2
0:10:0
0
3
0:03:0
0
4
0:04:0
1
0
1:00:0
1
1
1:01:0
1
2
1:10:0
1
3
1:03:0
1
4
1:04:0
As the example shows, the device slot status display contains the
following columns:
I
Enclosure
I
Slot
I
scsiId
I
Insert
I
Status
The following sections describe the information that the
enclosure show slot command can display in these columns.
The Enclosure and Slot Columns
The Enclosure column displays the ID associated with the
enclosure management device that you specified on the command
line. If you did not specify an ID, the enclosure show slot
command displays the IDs for all enclosure management devices
connected to the controller. In the example, the enclosure show
slot command displays enclosure management device IDs 0 and
1.
The Slot column displays the unit number associated with the
device slot that you specified on the command line. If you did not
specify a unit number, the enclosure show slot command
displays the unit numbers for all device slots on the enclosure
management device or devices. In the example, the enclosure
show slot command displays the device slot status for device
slots 0 through 4 for enclosure management devices 0 and 1.
Status
4
OK
0
UNCONFIG
0
UNCONFIG
0
UNCONFIG
0
UNCONFIG
0
UNCONFIG
0
UNCONFIG
0
UNCONFIG
0
UNCONFIG
0
UNCONFIG
enclosure Commands
9-33