Arcconf Setstatsdatacollection; Arcconf Setvmcredential; Arcconf Task - Adaptec Command Line Utility User Manual

arcconf setstatsdatacollection

Enables or disables statistics collection for a controller. To display the statistics, use the
getlogs command (see
Syntax
ARCCONF SETSTATSDATACOLLECTION <Controller#> Enable|Disable
Parameters
Controller# is the controller number.
Enable turns statistics collection on.
Disable turns statistics collection off.
Example
ARCCONF SETSTATSDATACOLLECTION 1 ENABLE

arcconf setvmcredential

Resets the Hypervisor login credentials for
Note:
This command is available for VMware Guest OSs running Remote ARCCONF only.
Syntax
SETVMCREDENTIAL <Esxip> <Esxcimomport> <Esxuserid> <Esxpassword> [noprompt]
Parameters
Esxip is the Hypervisor IP address.
Esxcimomport is the Hypervisor CiMOM port number.
Esxuserid is the Hypervisor user name.
Esxpassword is the Hypervisor password.
Example
ARCCONF SETVMCREDENTIAL 172.18.46.101 5989 root passwd

arcconf task

Performs a task on a logical drive or a physical drive.
Syntax
ARCCONF TASK
TASK START <Controller#> LOGICALDRIVE <LogicalDrive#> <options> [noprompt]
TASK STOP <Controller#> LOGICALDRIVE <LogicalDrive#>
TASK START <Controller#> DEVICE <Channel> <ID> <options> [noprompt]
TASK STOP <Controller#> DEVICE <Channel> <ID>
Parameters
Controller# is the controller number
LogicalDrive# is the number of the logical drive in which the task is to be performed
Chapter 2: Using the Command Line Utility
page 23).
VMware Guest OSs running Remote ARCCONF
36
●
arcconf
.