Controller Show Channels - Adaptec AAR-2020SA Reference Manual

controller show channels

To show all of the channels on a controller and the associated
characteristics of each channel, use the controller show
channels command. See the installation guide for your controller
to determine the number of channels it actually supports.
Syntax
controller show channels
Examples
In the following example, the system displays the channels on the
currently opened controller:
AAC0> controller show channels
Executing: controller show channels
Ch# Host ID Targets Type
--- ------- ------- --------- ---------
0 7 15
1 7 15
2 7 15
3 7 15
The following example displays the channels on the currently
opened controller:
AAC0> controller show channels
Executing: controller show channels
Ch# Host ID Targets Type
--- ------- ------- --------- ---------
0 7 15
1 7 15
2 7 15
3 7 15
The following sections provide more information on the items that
the controller show channels command displays.
The Ch# and Host ID Items
The Ch# item displays the number of the channel on the controller.
In the example there are four channels on the currently opened
controller. See the installation guide for your controller to
determine the number of channels it actually supports.
The Host ID item displays the SCSI device ID of the host controller,
which in the example is 7 for all channels.
Max Usage
NoInfo NoInfo
NoInfo NoInfo
NoInfo NoInfo
NoInfo NoInfo
Max Usage
NoInfo NoInfo
NoInfo NoInfo
NoInfo NoInfo
NoInfo NoInfo
controller Commands
4-22