Emerson Epsilon Eb Series Reference Manual page 89

Epsilon Eb and E Series EN Drives Reference Manual
Output Functions Window
This window allows you to select the output function you wish to assign to an output line.
Output Line Selection Radio Button
E
N E Series Only
This selection box is used to assign an output function to an output line. Highlight the
function you wish to assign, then select the appropriate output line. To unassign an output
function, highlight the function in the Output Functions window, then select the
"unassigned" option.
Figure 54: E Series Output Line Selection
Output Line Selection
Epsilon Only
This list box allows you to assign or unassign the currently highlighted Output Function
to an Output Line. Click on the list box arrow to see the possible assignment lines. Then
click on one of the line numbers to assign the function. This list box would normally be
used when a mouse is not available to navigate the software. Assigning the input functions
can also be accomplished by dragging the Output Function and dropping it onto an Output
line. To unassign an output function, highlight the function in the Output Lines window
and press the delete key or drag the output function from the window.
Figure 55: Epsilon Output Line Selection
Output Lines Window
Active State
The setting for "Active State" is displayed next to each output function. See "Active Off"
check box below.
Functions assigned ...
This feature displays the Output Function assigned to each particular Output Line.
72
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com