Emerson Epsilon Eb Series Reference Manual page 37

Epsilon Eb and E Series EN Drives Reference Manual
Step 3: Opening an Online Configuration Window
If you are not already online with the drive, use this section to upload a configuration for
online editing.
To open an online Configuration Window, click the Upload icon on the toolbar. PowerTools
will display the Scanning dialog box while it scans your PC's serial ports for any compatible
devices.
Next, the Upload Drive Configuration dialog box is displayed. This dialog box allows you to
select the device(s) you wish to upload into a Configuration Window.
Figure 17: Upload Configuration Dialog Box
Selected Drives Radio Button
If you have only one device connected, that device's address will be displayed in the Selected
drives data box. If you have more than one device connected in a multi-drop configuration,
the Selected drives data box will be empty. You can then select either the All drives radio
button or the Show drives button.
All Drives Radio Button
If you select the All drives radio button, PowerTools will open a Configuration Window for
each device connected to your PC.
Show drives . . . Button
The Show drives button will display the Available Devices dialog box. This dialog box
displays a list of the devices that are attached to your system (or network). This includes both
EMERSON Motion Control and non-EMERSON devices. Devices which are not serviceable
by PowerTools software will be grayed.
20
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com