Emerson Epsilon Eb Series Reference Manual page 27

Epsilon Eb and E Series EN Drives Reference Manual
Figure 6: EZ Setup Tab
Identification Group:
1. Enter an identifying name in the "Name" box for the drive you are setting up. You can
use up to 24 alpha-numeric characters.
2. Enter the "Target Drive Address(es)" to which you wish to download the setup
information. Unless you have changed the Modbus address of your drive, leave this
parameter set to the default value of 1.
You may use commas (,) or spaces ( ) to separate individual drive addresses or you may
use hyphens (-) to include all the drive addresses within a range. For example, if you
wanted to download to drives 1, 3, 4, 5, 6, 7 and 9 you could enter the addresses like this:
1,3-7,9.
Configuration Group:
1. Click the down arrow of the "Drive Type" list box, then select the drive model for the
drive you are currently setting up.
2. Click the down arrow of the "Motor Type" list box, then select the motor connected to
the drive you are setting up. PowerTools will only display the motor models that are
compatible with the "Drive Type" you selected.
3. Click the down arrow of the "Line Voltage" list box and select the voltage (115 or 230)
which will be powering the drive (E Series drive only).
10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com