Emerson Epsilon Eb Series Reference Manual page 77

Epsilon Eb and E Series EN Drives Reference Manual
Identification Group
Name
Enter a 24 character alpha-numeric name for the drive you are currently setting up. Assigning
a unique name for each drive in your system allows you to quickly identify a drive when
downloading, editing and troubleshooting. All keyboard characters are valid.
Target Drive Address(es)
Enter the "Target Drive Address(es)" you wish to download the setup information to (or
upload from).
To download to more than one drive simultaneously, separate the device addresses with
commas, spaces or hyphens. Commas and spaces seperate individual addresses. Hyphens
indicate to include all address, between the indicated addresses, (i.e., 1, 3, 7) means download
to addresses 1 and 3 and 7 only. (1 - 7) indicates, download to addresses 1, 2, 3, 4, 5, 6, 7. If
you download to more than one device simultaneously, they must all be the same drive and
any FM modules attached to E Series drives must all be of the same model and firmware
revision.
Configuration Group
Drive Type
Select the drive model for the system you are currently setting up. PowerTools software will
only display the motor models that are compatible with the drive you selected and any user
defined motors.
Motor Type
Select the motor you wish to use. PowerTools software will only display the motor models
that are compatible with the drive you selected and any user defined motors.
Caution
Selecting the wrong motor type can cause poor performance and may even damage the
motor and/or drive.
Load Group
Inertia Ratio
Inertia Ratio specifies the load to rotor inertia ratio and has a range of 0.0 to 50.0. If the exact
inertia is unknown, a conservative approximate value should be used. If you enter an inertia
60
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com