Emerson Epsilon Eb Series Reference Manual page 135

Epsilon Eb and E Series EN Drives Reference Manual
E Series Drive
Figure 71: Diagnostic Analog Output Test Points
The DGNE cable was designed to be used with either an oscilloscope or a meter. The wires
are different lengths to avoid shorting to each other. However, if signals do get shorted to
GND, the drive will not be damaged because the circuitry is protected.
Yellow
DGNE Cable
Figure 72: Diagnostic Cable (DGNE) Diagram
118
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Channel #2
Analog GND
Channel #1
D/A
Black
D/A
(GND)
Blue
10 Ohm
DGNE Cable
Epsilon Drive
10 Ohm
2 GND 1
2 GND 1
44 29
Command Connector
43 Pin #'s