Emerson Epsilon Eb Series Reference Manual page 87

Epsilon Eb and E Series EN Drives Reference Manual
Input Line Selection Radio Button
E
N E Series Only
This selection box is used to assign an input function to an input line. Highlight the
function you wish to assign, then select the appropriate input line. To unassign an input
function, highlight the function in the Input Functions window, then select the
"Unassigned" option.
Figure 51: E Series Input Line Selection View
Input Line Selection List Box
Epsilon Only
This list box allows you to assign or unassign the currently highlighted Input Function to
an Input Line. Click on the list box arrow to see the possible assignment lines. Then click
on one of the line numbers to assign the function. This list box would normally be used
when a mouse is not available to navigate the software. Assigning the input functions can
also be accomplished by dragging the Input Function and dropping it onto an Input line.
To unassign an input function, highlight the function in the Input Lines window and press
the delete key or drag the input function from the window.
Figure 52: Epsilon Input Line Selection View
Active Off Check Box
This check box allows you to change the "Active On/Off" state. Select the desired function
in the input functions window, then check or uncheck the "Active Off" checkbox.
Making an input function "Active On" means that it will be active when +10 to 30 VDC is
applied to the input line it's assigned to and is inactive when no voltage is applied to the line.
Making an input function "Active Off" means that it will be active when no voltage is applied
to the input line and inactive while +10 to 30 VDC is being applied.
Always Active Check Box
This check box is used to make an input function "Always Active". When you make an input
function always active, it's active whether assigned to an input line or not. If you make an
70
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com