Emerson Epsilon Eb Series Reference Manual page 102

Figure 61: I/O Status Tab
Inputs Group
Inputs Lines Window
This feature shows the various input lines and whether they are active. The line is active if the
circle next to the line is green or lit-up.
Active State
The active state is shown for each input line.
Forced
The forced state is shown for each input line.
Forced On and Forced Off
You can force an input line to a level by using the "Forced On" and "Forced Off" check boxes.
When you force an input line "On" or "Off", all the functions assigned to that line will be
affected.
Note
The forced state of input and output lines are not saved to NVM and will be lost when the
drive is powered down.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setting Up Parameters
85