Emerson Epsilon Eb Series Reference Manual page 108

Actual Operating Mode
This parameter returns the actual (or current) operating mode or state of the drive. This is
determined by the Operating Mode Default, Alternate Operating Mode, Input Functions
which override the operating mode, fault conditions, function modules or disabling the drive.
Bus Voltage
Epsilon Only
Displays the actual measured voltage on the DC power bus.
ID Group (Detailed Setup view only)
Firmware Revision
Displays the revision of the firmware in the drive you are currently online with.
Serial Number
Displays the serial number of the drive with which you are currently online.
Drive Run Time Group (Detailed Setup view only)
Total Power Up Time
Total amount of time displayed in hours the drive has been powered-up since leaving the
factory.
Power Up Count
Number of times the drive has been powered-up since leaving the factory.
Power Up Time
Amount of time displayed in hours the drive has been powered-up since last power up.
View Active Faults Button (Detailed Setup view only)
Pushing this button displays the Active Drive Faults dialog box. From this dialog box you can
reset any resettable active fault by clicking the Reset button.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setting Up Parameters
91