Emerson Epsilon Eb Series Reference Manual page 30

Figure 10: Velocity Submode, Velocity Presets
3. Select the desired "Velocity Preset" number.
4. Enter a "Velocity Preset" for each "Preset Number" being used.
5. Enter an "Accel/Decel Presets" value for each "Preset Number" being used.
6. Click on the Inputs tab. Assign the "Velocity Preset Line #1" and "Velocity Preset Line
#2" functions to input lines by highlighting the function then selecting one of the "Input
Line Selection" radio buttons or by dragging the highlighted preset to the desired input
lines.
7. The Velocity Preset Input functions can be made Always Active or Active Off by using
the respective check box.
Velocity Summation Submode Setup
1. Select the "Velocity Mode" radio button from the Operating Mode group.
2. Select the "Summation" submode radio button from the Submode group.
3. Select the desired "Velocity Preset" number.
4. Enter a "Velocity Preset" for each "Preset Number" being used.
5. Enter an "Accel/Decel Presets" value for each "Preset Number" being used
.
Figure 11: Velocity Summation Submode
Torque Mode Setup
This procedure assumes that you have connected the proper analog command wiring as
described in the "Installation" section of this manual.
1. Select the "Torque Mode" radio button from the Operating Mode group.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Quick Start
13