Wall mounting
„
Panel mounting
„
Arm mounting
„
Rack mounting
„
The four mounting methods are fully described below.
3.7.1 Wall Mounting
To mount the PC 5150 Flat panel PC onto a wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four bracket screw holes on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (see Figure 3-11).
Figure 3-11: Wall-mounting Bracket
54
PC 5150 Flat Panel PC
ACNODES ® Corp.