Î
Restore on AC Power Loss [Last State]
Use the Restore on AC Power Loss option to specify what state the system returns to if
there is a sudden loss of power to the system.
Î
Power Off
Î
Power On
Î
Last State
Î
Resume on Ring/LAN [Disabled]
The Resume on Ring/LAN BIOS option specifies if the system will be roused from a
suspended or standby state when there is activity on the RI (ring in) modem line. That is,
the system will be roused by an incoming call on a modem.
Î
Disabled
Î
Enabled
Î
Resume on PME# [Disabled]
The Resume on PME# BIOS option specifies if the system will be roused from a
suspended or standby state when there is activity on the PCI PME (power management
event) controller.
Î
Disabled
Î
Enabled
Î
Resume On RTC Alarm [Disabled]
Use the Resume On RTC Alarm option to specify the time the system should be roused
from a suspended state.
122
The system remains turned off
The system turns on
D
The system returns to its previous state. If it was on, it
EFAULT
turns itself on. If it was off, it remains off.
D
Wake event not generated by an incoming call
EFAULT
Wake event generated by an incoming call
D
Wake event not generated by PCI PME controller
EFAULT
activity
Wake event generated by PCI PME controller activity
PC 5150 Flat Panel PC
ACNODES ® Corp.