Remove The; Table 3-1: Onboard Jumpers - Acnodes PC 5150 User Manual

jumper means connecting the pins of the jumper with the plastic clip and to
OPEN a jumper means removing the plastic clip from a jumper.
The EMBEDED comes with fifteen jumpers. They are listed below.
Jumper
Clear CMOS Setup
COM# RI and Voltage Selection
COM2 RS-232/422/485 Setup
CompactFlash Card Setup
CPU Voltage Setting
Keyboard/Mouse Power Source
LCD Voltage Select

Table 3-1: Onboard Jumpers

3.5.1 Remove the Back Cover
The back cover is secured to the chassis with nine retention screws, eight on the rear
panel and one on the bottom panel. (See Figure 3-1) Remove the nine retention screws
and lift the cover off the PC 5150.
PC 5150 Flat Panel PC
Type Label
3-pin header JP1
JP6
JP7
JP8
JP9
3-pin header
JP13
JP14
JP15
JP16
12-pin header JP10
6-pin header JP20
2-pin header JP12
10-pin header S3
3-pin header JP18
6-pin header JP2
43