Table of Contents
Advertisement
the manufacturer's code. The SPD enables the BIOS to read the spec sheet of the DIMMs
on boot-up and then adjust the memory timing parameters accordingly.
Î
Disabled
Î
Enabled
If the Configure DRAM Timing by SPD option is disabled, the following configuration
options appear.
DRAM CAS# Latency [3]
„
DRAM RAS# to CAS# Delay [5 DRAM Clocks]
„
DRAM RAS# Precharge [5 DRAM Clocks]
„
DRAM RAS# Activate to Prechcharge [15 DRAM Clocks]
„
Î
Memory Hole [Disabled]
Use the Memory Hole option to reserve memory space between 15MB and 16MB for ISA
expansion cards that require a specified area of memory to work properly. If an older ISA
expansion card is used, please refer to the documentation that came with the card to see if
it is necessary to reserve the space.
Î
Disabled
Î
15MB – 16MB
Î
Init. Graphic Adapter Priority [PCI/Int-VGA]
The Init. Graphic Adapter Priority option selects the graphics controller the system uses
as a primary boot device. The options are:
Internal VGA
„
PCI/Int-VGA
„
116
DRAM timing parameters are manually set using the
DRAM sub-items
D
DRAM timing parameter are set according to the
EFAULT
DRAM Serial Presence Detect (SPD)
D
Memory is not reserved for ISA expansion cards
EFAULT
Between 15MB and 16MB of memory is reserved for
ISA expansion cards
D
EFAULT
PC 5150 Flat Panel PC
ACNODES ® Corp.
Advertisement
Chapters
Table of Contents
