Figure 4-5: Elevated Platform Retention Screws (Bottom Panel)
Step 3: A PCI riser card is attached to the side of the elevated platform with two
retention screws. Remove the two retention screws and the PCI riser card from
the chassis.
Figure 4-6: PCI Riser Card Retention Screws
4.4 DIMM Replacement
To install the DIMM please follow the steps below.
Step 1: Remove the back cover. See Section 4.3.1 above.
Step 2: Locate the DIMM. It is on the motherboard near the top of the PC 5150 Flat
screen PC. Push the white clips on the side of the DIMM down. The DIMM is
dislodged from the DIMM socket. (See Figure 4-7)
PC 5150 Flat Panel PC
67