in the Figure 3-9.
Step 8: Slide the CD drive into the PC 5150 and align the two retention screw holes in
the side of the CD drive bracket with the retention screw holes on the bottom
panel.
Step 9: Reinsert the two previously removed retention screws.
Step 10: Connect the CD ribbon cable and the power cable from the connectors on the
motherboard and the PSU to the rear of the CD drive. Figure 3-10 shows a
properly installed CD drive.0:
Figure 3-10: CD Drive Installed
3.7 Mounting the System
WARNING!
When mounting the PC 5150 Flat panel PC onto an arm, onto the wall or
onto a panel, it is better to have more than one person to help with the
installation to make sure the PC 5150does not fall down and get
damaged.
The four methods of mounting the PC 5150are:
PC 5150 Flat Panel PC
53