Panel Mounting; Figure 3-13: Secure The Chassis - Acnodes PC 5150 User Manual

Step 9: Secure the panel PC with the wall-mounting kit. To do this, stick the protective
cushion to the wall-mounting kit first. Then, put the wall-mounting kit on the top
panel of the panel PC. Carefully mark the location of the wall-mounting kit screw
holes on the wall. Drill a pilot hole at the marked location on the wall. Secure the
wall-mounting kit to the wall by inserting a retention screw into the pilot hole on
the wall (Figure 3-13). This step is to avoid the panel PC being pushed apart
from the wall-mounting bracket accidentally. Step 0:

Figure 3-13: Secure the Chassis

3.7.2 Panel Mounting

To mount the PC 5150 Flat panel PC into a panel, please follow the steps below.
NOTE:
The maximum panel thickness should be no more than 6mm.
Step 1: Select the position on the panel to mount the PC 5150.
56
PC 5150 Flat Panel PC
ACNODES ® Corp.