Pci Latency Timer [64]; Allocate Irq To Pci Vga [Yes]; Palette Snooping [Disabled] - Acnodes PC 5150 User Manual

Î

PCI Latency Timer [64]

Use the PCI Latency Timer option to specify the PCI latency time. The latency time is
measured in units of PCI clock cycles for the PCI device latency timer register.
Configuration options are:
32
„
64
„
96
„
128
„
160
„
192
„
224
„
248
„
Î

Allocate IRQ to PCI VGA [Yes]

Use the Allocate IRQ to PCI VGA option to restrict the system from giving the VGA
adapter card an interrupt address.
Î
Yes D
EFAULT
Î
No
Î

Palette Snooping [Disabled]

Use the Palette Snooping option to enable or disable the palette snooping function.
Î
Disabled
Î
Enabled
104
D
EFAULT
Assigns an IRQ to a PCI VGA card if card requests IRQ
Does not assign IRQ to a PCI VGA card even if the card
requests an IRQ
D Unless the VGA card manufacturer requires palette
EFAULT
snooping to be enabled, this option should be disabled.
PCI devices are informed that an ISA based Graphics
device is installed in the system so the ISA based
Graphics card functions correctly. This does not
necessarily indicate a physical ISA adapter card. The
graphics chipset can be mounted on a PCI card. Always
PC 5150 Flat Panel PC
ACNODES ® Corp.