1. Manuals
  2. Brands
  3. Acnodes Manuals
  4. Touch Panel
  5. PC 5170
  6. User manual

Acnodes PC 5170 User Manual

17-inch touch panel pc
Hide thumbs Also See for PC 5170:
Table of Contents

Advertisement

Quick Links

Download this manual
PC 5170
17-inch touch PANEL PC

USER MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Acnodes PC 5170

Summary of Contents for Acnodes PC 5170

  • Page 1: User Manual

    PC 5170 17-inch touch PANEL PC USER MANUAL...
  • Page 2 Page 1...
  • Page 3 Wall mounting procedure updated LCD dimensions corrected ABOUT THIS MANUAL This document covers the description and installation instructions for the PC 5170 flat panel PC. COPYRIGHT NOTICE This document is copyrighted 2006, by ACNODES Technology Corp. All rights are reserved.
  • Page 4 Only qualified engineers from certified system integrators or VARs are allowed to make necessary functional modifications to the panel PC, e.g., adding a touch screen. ACNODES offers the customization service on a pre-order basis. For installations related to human safety, connect a separately installed mechanical switch instead of the panel PC’s power switch.
  • Page 5 ADDITIONAL INFORMATION AND ASSISTANCE Maintenance and Cleaning Note the following precautions before starting to clean the panel PC. When cleaning any single part or component of the computer, please read and understand the details below fully. Page 4 However, the ACNODES ® Corp.
  • Page 6 Although many companies have created products to help improve the process of cleaning Panel PCs and peripherals, users can also use household items to clean their computers and peripherals. Below is a list of some items that may be needed or used when cleaning the panel PC or panel PC peripherals.
  • Page 7 LCD should the need arise for adding a functionality. wrist strap and an anti-static work pad is recommended. static-accumulating materials in the work area. Page 6 The use of a grounded Avoid dust and debris or other ACNODES ® Corp.
  • Page 8 CONVENTIONS USED IN THIS MANUAL WARNING! Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. The word “warning” is written as “WARNING,” both capitalized and bold and is followed by text in italics.

  • Page 9: Table Of Contents

    INTRODUCTION... 19 1.1 PC 5170 F PC O ANEL 1.1.1 PC 5170 Model Variation... 20 1.1.2 PC 5170 Flat Panel PC Applications ... 20 1.1.3 PC 5170 Flat Panel PC Features... 20 1.2 PC 5170 E XTERNAL VERVIEW 1.2.1 General Description... 21 1.2.2 Front Panel ...
  • Page 10 2.5 P ERIPHERAL EVICE NTERFACES 2.5.1 OEM Options ... 38 2.5.2 Internal Slots ... 38 2.5.3 Internal Peripheral Device Connectors ... 38 2.5.4 External Peripheral Device Connectors ... 39 INSTALLATION AND CONFIGURATION ... 41 3.1 I NSTALLATION RECAUTIONS 3.2 P REINSTALLED OMPONENTS 3.3 I...
  • Page 11 5.3.5 Hardware Health Configuration ... 104 5.3.6 ACPI Configuration ... 105 5.3.6.1 General ACPI Configuration... 106 5.3.6.2 Advanced ACPI Configuration ... 107 5.3.7 MPS Configuration ...110 Page 10 ... 70 ... 70 LEVATED LATFORM ETACHMENT ... 75 ... 78 ACNODES ® Corp..70...
  • Page 12 ACNODES PANEL PC PRODUCT LINE ... 139 A.1 ACNODES P PC P ANEL RODUCTS ... 140 A.1.1 Overview ... 140 A.1.2 ACNODES Panel PC Product Series ... 140 A.2 P PC P ANEL RODUCT OLUTIONS A.2.1 PPC-27 Series Panel PC Solutions ... 140 A.2.2 PPC-37 Series Panel PC Solutions ...
  • Page 13 Page 11...
  • Page 14 RIVER NSTALLATION D.3 T OUCH ANEL RIVER ONFIGURATION INDEX... 185 Page 12 ... 163 ONNECTOR ... 164 ONNECTOR ... 165 ... 166 TORAGE OCKET ... 167 ... 167 ... 168 NDICATORS ... 168 ... 170 ... 183 ACNODES ® Corp.
  • Page 15 PC 5170 Flat Panel PC List of Figures Figure 1-1: PC 5170 Front View ...21 Figure 1-2: PC 5170 Rear View ...22 Figure 1-3: PC 5170 Top View ...23 Figure 1-4: Bottom View ...24 Figure 1-5: Left View ...24 Figure 1-6: Left View ...25 Figure 1-7: Frame Rear View ...25...
  • Page 16 PC 5170 Flat Panel PC Figure 4-2: CD Drive Retention Screws ...73 Figure 4-3: Internal Elevated Platform Retention Screws ...73 Figure 4-4: Elevated Platform Retention Screws (Top Panel) ...73 Figure 4-5: Elevated Platform Retention Screws (Right Panel)...74 Figure 4-6: Elevated Platform Retention Screws (Bottom Panel) ...74 Figure 4-7: Elevated Platform Retention Screws (PCI Riser Card) ...74...
  • Page 17 PC 5170 Flat Panel PC List of Tables Table 1-1: PC 5170 Model Variation ...20 Table 1-2: PC 5170 Specifications ...28 Table 1-3: Motherboard Specifications ...29 Table 1-4: 17” TFT LCD Monitor Specifications ...30 Table 1-5: Power Supply Specifications ...31 Table 3-1: Onboard Jumpers ...45...
  • Page 18 PC 5170 Flat Panel PC List of BIOS Menus BIOS Menu 1: Main ...84 BIOS Menu 2: Advanced...86 BIOS Menu 3: CPU Configuration...87 BIOS Menu 4: IDE Configuration ...89 BIOS Menu 5: IDE Master and IDE Slave Configuration...93 BIOS Menu 6: Floppy Configuration ...97 BIOS Menu 7: Super IO Configuration ...98...
  • Page 19 AC ’97 Audio Codec 97 ACPI Advanced Configuration and Power Interface Advanced Power Management ARMD ATAPI Removable Media Device ASKIR Shift Keyed Infrared Advanced Technology Attachments BIOS Basic Input/Output System CFII Compact Flash Type 2 CMOS Complementary Metal Oxide Semiconductor Central Processing Unit Codec Compressor/Decompressor...
  • Page 20 PC 5170 Flat Panel PC THIS PAGE IS INTENTIONALLY LEFT BLANK Page 18 ACNODES ® Corp.

  • Page 21: Introduction

    PC 5170 Flat Panel PC Chapter 1 Introduction Page 19...

  • Page 22: Pc 5170 Flat Panel Pc Overview

    1.1 PC 5170 Flat Panel PC Overview The PC 5170 flat panel PC is a flexible, multi-functional flat panel PC that can be applied in diverse operational environments and implemented in multi-faceted applications. The PC 5170 comes fully kitted with a high-performance motherboard, CPU, power supply unit and a host of other peripheral interface connectors.

  • Page 23: Pc 5170 External Overview

    GbE, USB 2.0, audio, parallel port, serial port connectors and a CF card slot. 1.2.2 Front Panel The front panel of the PC 5170 (Figure 1-1) is a flat panel 17” TFT LCD screen surrounded by an aluminum frame.

  • Page 24: Rear Panel

    1.2.3 Rear Panel The rear panel has a fan vent, four VESA standard mounting holes and several retention screw holes. The VESA mounting holes are circled in Figure 1-2. Figure 1-2: PC 5170 Rear View Page 22 ACNODES ® Corp.

  • Page 25: Top Panel

    The top panel has two fan vents and three retention screws for securing the drive bay bracket. The retention screws are circled in Figure 1-3 below. Figure 1-3: PC 5170 Top View 1.2.5 PC 5170 Bottom Panel The bottom panel shown in Figure 1-4 has the following interfaces:...

  • Page 26: Left Panel

    The retention screws are circled in Figure 1-5. Figure 1-5: Left View 1.2.7 Right Panel The right side panel provides access to a slim type CD drive bay and a FDD drive bay shown in Figure 1-6. Page 24 ACNODES ® Corp.

  • Page 27: Frame

    Figure 1-6: Left View 1.2.8 Frame An aluminum frame surrounds the 17” TFT LCD screen. The back of the aluminum frame has sixteen mounting screw holes. These screws are circled in Figure 1-7. Figure 1-7: Frame Rear View Page 25...

  • Page 28: Pc 5170 Internal Overview

    1.3 PC 5170 Internal Overview The PC 5170 internal components are configured in a three level format. An elevated platform on the right side of the chassis supports a HDD, a CD drive and a FDD. On the second level, below the elevated platform, are a motherboard and a PSU module. The motherboard and the PSU module are installed on a metal sheet that protects the rear of the 17”...
  • Page 29 SPECIFICATION DETAIL Aluminum Front Panel meets IP65 standard Front Panel Heavy-duty Steel Chassis 17” High luminance TFT LCD LCD Panel 1280 x 1024 (SXGA) Resolution 300 cd/m2 Brightness 500:1 Contrast Ratio 50,000 hrs LCD MTBF 50,000 hrs Backlight MTBF 140/130 Viewing Angle (H-V) Optional 5-wire resistive type touch screen Touch Screen...

  • Page 30: Pc 5170 Motherboard Specifications

    Net/Gross Weight Environment Table 1-2: PC 5170 Specifications 1.4.3 PC 5170 Motherboard Specifications The PC 5170 comes with a EMBEDDED motherboard. The technical specifications of the motherboard are listed in Table 1-3. SPECIFICATION DETAIL Socket-478 base Intel Pentium 4 / Celeron D...

  • Page 31: Flat Panel Screen

    Table 1-3: Motherboard Specifications 1.4.4 Flat Panel Screen The PC 5170 comes with a 17” TFT LCD monitor at the front of the flat panel PC (Figure 1-1). The specifications for the LCD monitor are shown in Table 1-4 below.

  • Page 32: Power Supply

    Table 1-4: 17” TFT LCD Monitor Specifications 1.4.5 Power Supply The PC 5170 flat panel PC comes with an 180W AC-DC 1U, RoHS compliant ATX power supply. The PSU has an MTBF greater than 100,000 hours. The maximum power output for the PSU is shown below.

  • Page 33: Table 1-5: Power Supply Specifications

    The specifications for the PSU module are shown in (Table 1-5). Voltage Frequency Input Current INPUT Inrush Current Voltage (V) Min. Load (A) Max. Load (A) OUTPUT Ripple and Noise (mV) +3.3V & +5V≦61W +3.3V & +5V & +12V≦160W Watt Hold-up time Efficiency GENERAL...

  • Page 34: Dimensions

    PC 5170 Flat Panel PC 1.5 Dimensions The dimensions of the PC 5170 flat panel PC are shown in Figure 1-9 below. Figure 1-9: Dimensions (units in mm) Page 32 ACNODES ® Corp.

  • Page 35: Embedded Motherboard

    PC 5170 Flat Panel PC Chapter EMBEDD Motherboard...
  • Page 36 Page 33...

  • Page 37: Introduction

    EMBEDDED, please refer to the EMBEDDED user manual. 2.2 CPU Support The EMBEDDED installed in the PC 5170 supports socket 478, Intel Pentium 4 / Pentium M / Celeron M FSB 533 MHz CPU or on-board Intel Celeron M 1GHz zero cache CPU. 2.3 On-board Chipsets 2.3.1 Northbridge and Southbridge Chipsets...

  • Page 38: Ich5 Southbridge Chipset

    quality and full surround sound capability. 42 LAN Connect Interface (LCI) provides network solutions for 10/100 Mbps Ethernet and 10/100 Mbps Ethernet with LAN manageability 43 Dual Ultra ATA/100 controllers 44 Error Correcting Code (ECC) support in integrated graphics mode only 45 The Intel Application Accelerator software provides additional performance over native ATA drivers by improving I/O transfer rates and enabling faster O/S load time, resulting in accelerated boot times...

  • Page 39: Graphics Support

    Page 36 is integrated on the Intel® 852GME Northbridge chipset. The ACNODES ® Corp.
  • Page 40 59 Zone Rendering 2 Technology: Enhances the performance of zone rendering by using larger zones and new commands that improve graphics pipeline efficiency. 60 Dynamic Video Memory Technology v2.0: Increases total system performance by optimizing the efficiency of AGP dynamic video memory by increasing its size of Video RAM allocation to 96 MB.

  • Page 41: Peripheral Device Interfaces, Connectors, And Slots

    Many of the peripheral device connectors listed below are not connected to any devices. These connectors are reserved for OEM customizations. For a customized option, please contact the vendor, reseller or ACNODES sales representative. 2.5.2 Internal Slots The slots listed below can all be found on the EMBEDDED motherboard.

  • Page 42: External Peripheral Device Connectors

    69 1 x ATX power connector 70 2 x Audio connectors 71 1 x DIO connector 72 3 x Fan connectors 73 1 x FDD connector 74 2 x IDE device connectors 75 1 x IrDA connector 76 1 x Keyboard connector 77 1 x PS/2 mouse connector 78 1 x LCD backlight connector 79 1 x LVDS interface connector...
  • Page 43 PC 5170 Flat Panel PC THIS PAGE IS INTENTIONALLY LEFT BLANK Page 40 ACNODES ® Corp.

  • Page 44: Installation And Configuration

    PC 5170 Flat Panel PC Chapter 3 Installation and Configuration Page 41...

  • Page 45: Installation Precautions

    3.1 Installation Precautions When installing the PC 5170, please follow the precautions listed below: Power turned off: When installing the PC 5170 make sure the power is off. Failing to turn off the power may cause severe injury to the body and/or damage to the system.

  • Page 46: Installation And Configuration Steps

    WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the PC 5170 flat panel PC has been properly installed. The plastic cover ensures the screen is protected during the installation process.

  • Page 47: Packing List

    3.4.1 Packing List The PC 5170 flat panel PC is shipped with the following components: 107 1 x Carton 108 1 x Power cord 109 1 x Screw kit 110 1 x HDD IDE cable (44 pin + 2 x 40 pin)

  • Page 48: Remove The

    The back cover is secured to the chassis with thirteen retention screws, eleven on the rear panel and two on the bottom panel (Figure 3-1). Remove the thirteen retention screws and lift the cover off the PC 5170. Type Label...

  • Page 49: Cf Card Setup (Jp12)

    3.5.2 CF Card Setup (JP12) The CF Card Setup jumper configures a CF card as either the slave or the master. JP12 DESCRIPTION Open Slave (Default) Close Master Table 3-2: CF Card Setup Jumper Settings Page 46 ACNODES ® Corp.

  • Page 50: Clear Cmos Setup (Jp1)

    3.5.3 Clear CMOS Setup (JP1) If the motherboard fails to boot due to improper BIOS settings, use this jumper to clear the CMOS data and reset the system BIOS information. close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1 and 2. If the “CMOS Settings Wrong”...

  • Page 51: Com Port Ri And Voltage Selection

    Use JP6 and JP8 to set pin 9 of COM2 as signal RI or voltage source. 2-3 closed COM2 RI PIN Use RI 1-2 closed COM2 RI PIN Use Voltage Table 3-7: COM2 RI and Voltage Selection Jumper Page 48 DESCRIPTION ACNODES ® Corp.

  • Page 52: Table 3-8: Com2 Ri Voltage Selection Jumper

    DESCRIPTION 2-3 closed COM2 RI PIN Use Voltage +12V 1-2 closed COM2 RI PIN Use Voltage +5V Table 3-8: COM2 RI Voltage Selection Jumper Use JP13 and JP15 to set pin 9 of COM3 as signal RI or voltage source. JP15 DESCRIPTION 2-3 closed...

  • Page 53: Cpu Voltage Setting (S3)

    The LCD Voltage Setup jumper sets the voltage for the LCD screen. This setting MUST NOT be changed. Page 50 PC 5170 Flat Panel PC DESCRIPTION Pentium 4 CPU (Default) Pentium 4-M CPU (1.3V) DESCRIPTION ACNODES ®...

  • Page 54: Hdd, Fdd And Cd Drive Installation

    HDD bracket with the retention screw holes on the side of the HDD. Insert two retention screws into the bracket on both sides of the HDD. Install the HDD into the PC 5170 by aligning the retention screw holes in the Step 4: base of the HDD bracket with the retention screw holes on the elevated platform.

  • Page 55: Fdd Installation

    Step 4: the FDD adapter with the retention screw holes on the rear side of the FDD bracket. Insert two retention screws into the adapter (Figure 3-4). Connect the FDD adapter and FDD with ribbon cable. Page 52 ACNODES ® Corp.

  • Page 56: Cd Drive Installation

    Figure 3-4: FDD Adapter and FDD Bracket Installation Attach the FDD bracket to the FDD. To do this, align the four retention screw Step 5: holes in the FDD bracket with the retention screw holes on the sides of the FDD. Insert four retention screws into the bracket of the FDD.

  • Page 57: Figure 3-5: Cd Drive Adapter Installation

    Figure 3-5: CD Drive Adapter Installation Remove the back cover of the PC 5170 (see Section 3.5.1). Step 4: The CD drive blank plate assembly is attached to the rear panel by two retention Step 5: screws (Figure 3-6). Figure 3-6: CD Drive Retention Screws...

  • Page 58: Figure 3-7: Remove Cd Drive

    Figure 3-7: Remove CD Drive The CD drive blank plate assembly consists of a blank plate and two brackets Step 6: that attach the assembly to the chassis. The two brackets each have two screws that attach them to the blank plate. Remove the four screws that attach the brackets to the blank plate.

  • Page 59: Figure 3-9: Cd Drive Blank Plate Assembly

    CD drive according to the images shown in the Figure 3-9. Slide the CD drive into the PC 5170 and align the two retention screw holes in Step 8: the side of the CD drive bracket with the retention screw holes on the bottom panel.

  • Page 60: Figure 3-10: Cd Drive Installed

    PC 5170 Flat Panel PC Figure 3-10: CD Drive Installed Page 57...

  • Page 61: Mounting The System

    128 Rack mounting The four mounting methods are fully described below. 3.7.1 Wall Mounting To mount the PC 5170 flat panel PC onto a wall, please follow the steps below. Step 1: Select the location on the wall for the wall-mounting bracket.

  • Page 62: Figure 3-11: Wall-Mounting Bracket

    Figure 3-11: Wall-mounting Bracket Insert the four monitor mounting screws provided in the wall mounting kit into the Step 6: four screw holes on the real panel of the monitor and tighten until the screw shank is secured against the rear panel (see Figure 3-12). Align the mounting screws on the monitor rear panel with the mounting holes on Step 7: the bracket.

  • Page 63: Figure 3-12: Mount The Chassis

    PC 5170 Flat Panel PC Figure 3-12: Mount the Chassis Step 9: Secure the panel PC with the wall-mounting kit. To do this, stick the protective cushion to the wall-mounting kit first. Then, put the wall-mounting kit on the top panel of the panel PC.

  • Page 64: Panel Mounting

    Cut out a section of the panel that corresponds to the rear panel dimensions of Step 2: the PC 5170. Take care that the panel section that is cut out is smaller than the overall size of the metal frame that surrounds the PC 5170 but just large enough for the rear panel of the PC 5170 to fit through (Figure 3-14).

  • Page 65: Figure 3-14: Cut The Panel

    Figure 3-14: Cut the Panel Slide the PC 5170 through the hole until the metal frame is flush against the Step 3: panel. Insert the panel mounting clamps into the pre-formed holes along the edges of Step 4: the PC 5170, behind the metal frame. Refer to the mounting kit packing list for the required number of mounting clamps.

  • Page 66: Arm Mounting

    3.7.3 Arm Mounting The PC 5170 is VESA (Video Electronics Standards Association) compliant and can be mounted on an arm with a 100mm interface pad. To mount the PC 5170 on an arm, please follow the steps below. The arm is a separately purchased item. Please correctly mount the arm onto Step 1: the surface it uses as a base.

  • Page 67: Cabinet And Rack Installation

    PC 5170 flat panel PC. 3.7.4 Cabinet and Rack Installation The PC 5170 flat panel PC can be installed into a cabinet or rack. To do this, please follow the steps below.

  • Page 68: Figure 3-18: Secure The Rack/Cabinet Bracket

    Make sure the retention screw holes at the rear of the PC 5170 frame are Step 3: aligned with the retention screw holes in the cabinet/rack bracket. Secure the cabinet/rack bracket to the monitor by inserting and tightening the Step 4: retention screws (Figure 3-18).

  • Page 69: External Peripheral Interface Connectors

    Figure 3-19: Install into a Rack/Cabinet Step 6: Once the PC 5170 flat panel PC with the attached rack/cabinet bracket has been properly inserted into the rack/cabinet, secure the front of the rack/cabinet bracket to the front of the rack/cabinet (Figure 3-19). Step 0: 3.8 External Peripheral Interface Connectors...

  • Page 70: Ethernet Connection

    3.8.2 Ethernet Connection The two external peripheral interface RJ-45 connectors can be connected to an external LAN to provide Internet connectivity to the flat panel PC. 3.8.3 USB Connection The external peripheral interface USB connectors provide easy and quick access to external USB devices.
  • Page 71 PC 5170 Flat Panel PC THIS PAGE IS INTENTIONALLY LEFT BLANK Page 68 ACNODES ® Corp.

  • Page 72: System Maintenance

    PC 5170 Flat Panel PC Chapter 4 System Maintenance Page 69...

  • Page 73: System Maintenance Introduction

    4.2 Motherboard Replacement A user cannot replace a motherboard. If the motherboard fails it must be shipped back to ACNODES to be replaced. If the system motherboard has failed, please contact the system vendor, reseller or an ACNODES sales person directly.

  • Page 74: Back Cover Removal

    To access the panel PC internal components, the back cover must be removed. To remove the back cover, please follow the steps below. Remove the PC 5170 from its mount (panel, wall, rack, arm, etc.). Step 1: The back cover is secured to the chassis with thirteen retention screws, eleven Step 2: on the back cover and two on the bottom panel (Figure 4-1).

  • Page 75: Detaching The Elevated Platform

    4.3.2 Detaching the Elevated Platform Please read the warnings at the beginning of Section 4.3 before attempting to access any PC 5170 internal components. The elevated platform supports the FDD, CD drive and HDD. Back cover removal is discussed in Section 4.3.1. To detach the elevated platform, please follow the steps below.

  • Page 76: Figure 4-2: Cd Drive Retention Screws

    Figure 4-2: CD Drive Retention Screws Step 3: The elevated platform is secured to the chassis with fourteen retention screws, four on the internal platform (Figure 4-3), three on the top panel (Figure 4-4), three on the right panel (Figure 4-5), two on the bottom panel (Figure 4-6) and two on the PCI riser card (Figure 4-7).

  • Page 77: Dimm Replacement

    4.4 DIMM Replacement Please read the warnings at the beginning of Section 4.3 before attempting to access any PC 5170 internal components. To install/replace the DIMM modules please follow the steps below. Step 1: Remove the back cover (Section 4.3.1).

  • Page 78: Psu Module Replacement

    4.5 PSU Module Replacement Please read the warnings at the beginning of Section 4.3 before attempting to access any PC 5170 internal components. If the PSU module has been damaged it must be replaced. To replace the PSU module, please follow the steps below.

  • Page 79: Figure 4-9: Psu Motherboard Connectors

    Figure 4-9: PSU Motherboard Connectors The PSU module is secured to the PC 5170 flat panel PC with six retention screws, two connect to the bottom panel (Figure 4-10), two connect to the internal PSU bracket (Figure 4-12) which is connected to the chassis by two screws (Figure 4-11).

  • Page 80: Install The New Psu

    Figure 4-11: PSU Bracket to Chassis Retention Screws Remove the retention screws that connect the PSU to the PSU bracket (Figure Step 6: 4-12). Step 0: Figure 4-12: PSU Bracket Retention Screws 4.5.2 Install the New PSU To install a new PSU module, please follow the steps below. Attach the PSU bracket to the PSU module with the previously removed Step 1: retention screws.

  • Page 81: System Cooling Fan Replacement

    4.6 System Cooling Fan Replacement Please read the warnings at the beginning of Section 4.3 before attempting to access any PC 5170 internal components. If the system cooling fans have been damaged, they must be replaced. To replace the system cooling fans, please follow the steps below.

  • Page 82: Install The New System Cooling Fans

    Figure 4-13: System Cooling Fans Motherboard Connector Remove the system cooling fans retention screws from the left panel (Figure Step 4: 4-14). Figure 4-14: System Cooling Fans Left Panel Retention Screws Remove the system cooling fans from the chassis. Step 0: Step 5: 4.6.2 Install the New System Cooling Fans To install the new system cooling fans, please follow the steps below.
  • Page 83 Reattach the elevated platform. Step 4: Replace the back cover.Step 0: Step 5: Page 80 ACNODES ® Corp.

  • Page 84: Ami Bios

    PC 5170 Flat Panel PC Chapter 5 AMI BIOS Page 81...

  • Page 85: Introduction

    ELETE key when the “Press Del to enter SETUP” ELETE key is pressed, restart the computer and try ELETE to select, use the “+” and “-“ keys to NTER to quit. Navigation keys are shown in. ACNODES ® Corp.

  • Page 86: Getting Help

    Function F2 /F3 key Change color from total 16 colors. forward. F10 key Save all the CMOS changes, only for Main Menu Table 5-1: BIOS Navigation Keys 5.1.3 Getting Help When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears.

  • Page 87: Main

    Build Date: Date the current BIOS version was made 142 Processor: Displays auto-detected CPU specifications Type: Names the currently installed processor Speed: Lists the processor speed Count: The number of CPUs on the motherboard Page 84 Current BIOS version Installed BIOS ID ACNODES ® Corp.

  • Page 88: Advanced

    143 System Memory: Displays the auto-detected system memory. Lists memory size Size: The System Overview field also has two user configurable fields: Î System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds.

  • Page 89: Bios Menu 2: Advanced

    PC 5170 Flat Panel PC BIOS Menu 2: Advanced Page 86 ACNODES ® Corp.

  • Page 90: Cpu Configuration

    5.3.1 CPU Configuration Use the CPU Configuration menu (BIOS Menu 3) to view detailed CPU specifications and configure the CPU. BIOS Menu 3: CPU Configuration The CPU Configuration menu (BIOS Menu 3) lists the following CPU details: 153 Manufacturer: Lists the name of the CPU manufacturer 154 Brand String: Lists the brand name of the CPU being used 155 Frequency: Lists the CPU processing speed 156 FSB Speed: Lists the FSB speed...
  • Page 91 Disables legacy OSes that cannot support CPUs with extended CUPID functions from booting up Enables legacy OSes that cannot support CPUs with extended CUPID functions to boot up Disables the use of hyper threading technology Enables the use of hyper threading technology ACNODES ® Corp.

  • Page 92: Ide Configuration

    5.3.2 IDE Configuration Use the IDE Configuration menu (BIOS Menu 4) to change and/or set the configuration of the IDE devices installed in the system. BIOS Menu 4: IDE Configuration Î IDE Configuration [P-ATA Only] Use IDE Configuration option to setup the configuration of the hard drive interfaces. Î...
  • Page 93 IDE channels. ./P1-4 Set the physical ports (PO/PI) to be 3 EFAULT Set the physical ports (PO/PI) to be 4 The S-ATA interface cannot be configured as RAID drive. The S-ATA interface can be configured as RAID drive. ACNODES ® Corp.
  • Page 94 Î Hard Disk Write Protect [Disabled] The Hard Disk Write Protect BIOS option protects the hard disks from being overwritten. This menu item is only effective if the device is accessed through the BIOS. Î Disabled EFAULT Î Enabled Î IDE Detect Time Out (Sec) [35] The IDE Detect Time Out (Sec) BIOS option specifies the maximum time (in seconds) the AMI BIOS will search for IDE devices.
  • Page 95 IDE disk drive are used to detect the type of IDE cable used. The motherboard onboard IDE controller detects the type of IDE cable used. The IDE disk drive to detects the type of IDE cable used. ACNODES ® Corp.

  • Page 96: Ide Master, Ide Slave

    5.3.2.1 IDE Master, IDE Slave Use the IDE Master and IDE Slave configuration menu to view both primary and secondary IDE device details and configure the IDE devices connected to the system. BIOS Menu 5: IDE Master and IDE Slave Configuration Î...
  • Page 97 IDE channel. The BIOS does not attempt to search for other types of IDE disk drives on the specified channel. This option specifies an ATAPI Removable Media Device. These include, but are not limited to: Î Î LS-120 ACNODES ® Corp.
  • Page 98 Î Disabled Î Auto EFAULT Î Block (Multi Sector Transfer) [Auto] Use the Block (Multi Sector Transfer) to disable or enable BIOS to auto detect if the device supports multi-sector transfers. Î Disabled Î Auto EFAULT Î PIO Mode [Auto] Use the PIO Mode option to select the IDE PIO (Programmable I/O) mode program timing cycles between the IDE drive and the programmable IDE controller.
  • Page 99 BIOS auto detects HDD SMART support. Prevents BIOS from using the HDD SMART feature. Allows BIOS to use the HDD SMART feature Prevents the BIOS from using 32-bit data transfers. Allows BIOS to use 32-bit data transfers on supported hard disk drives. ACNODES ® Corp.

  • Page 100: Floppy Configuration

    5.3.3 Floppy Configuration Use the Floppy Configuration menu (BIOS Menu 6) to set or change the configurations for floppy disk drives. BIOS Menu 6: Floppy Configuration Î Floppy A [1.44 MB 3½”] The Floppy A configuration option determines the types of the floppy drive installed in the system.

  • Page 101: Super Io Configuration

    Use the Serial Port1 Address option to select the Serial Port 1 base address. Î Disabled Page 98 Allows BIOS to disable the floppy controller Allows BIOS to enable the floppy controller No base address is assigned to Serial Port 1 ACNODES ® Corp.
  • Page 102 Î Serial Port 1 I/O port address is 3F8 and the interrupt 3F8/IRQ4 EFAULT address is IRQ4 Î Serial Port 1 I/O port address is 3E8 and the interrupt 3E8/IRQ4 address is IRQ4 Î Serial Port 1 I/O port address is 2E8 and the interrupt 2E8/IRQ3 address is IRQ3 Î...
  • Page 103 Normal mode The parallel port is also be compatible with EPP and ECP devices ACNODES ® Corp. in the extended...
  • Page 104 Î IRQ5 is assigned as the parallel port interrupt address IRQ5 Î IRQ7 is assigned as the parallel port interrupt address IRQ7 EFAULT Î Digital I/O Address [280h] Use the Digital I/O Address option to select the interrupt address for digital I/O. Î...
  • Page 105 Serial port 4 IRQ address is 10 Serial port 4 IRQ address is 11 No base address is assigned to serial port 5 Serial port 5 I/O port address is 3E8 Serial port 5 I/O port address is 2E8 ACNODES ® Corp.
  • Page 106 Î Serial port 5 I/O port address is 2F0 EFAULT Î Serial port 5 I/O port address is 2E0 Î Serial Port5 IRQ [11] Use the Serial Port5 IRQ option to select the interrupt address for serial port 5. Î Serial port 5 IRQ address is 4 Î...

  • Page 107: Hardware Health Configuration

    188 System Temperatures: The following system temperatures are monitored CPU Temperature System Temperature 189 Fan Speeds: The CPU cooling fan speed is monitored. Fan1 Speed Page 104 Disables the health monitoring function Enables the health monitoring function ACNODES ® Corp.

  • Page 108: Acpi Configuration

    Fan2 Speed Fan3 Speed 190 Voltages: The following system voltages are monitored Vcore +1.50V +3.30V +5.00V +12.0V 5VSB 5.3.6 ACPI Configuration The ACPI Configuration menu (BIOS Menu 9) configures the Advanced Configuration and Power Interface (ACPI) and Power Management (APM) options. BIOS Menu 9: ACPI Configuration Page 105...

  • Page 109: General Acpi Configuration

    Use the Suspend Mode option to specify the sleep state the system enters when it is not being used. Î S1 (POS) Page 106 The system enters S1(POS) sleep state. The system appears off. The CPU is stopped; RAM is refreshed; the system is running in a low power mode. ACNODES ® Corp.

  • Page 110: Advanced Acpi Configuration

    5.3.6.2 Advanced ACPI Configuration Use the Advanced ACPI Configuration menu (BIOS Menu 11) to select the ACPI state when the system is suspended. BIOS Menu 11: Advanced ACPI Configuration Î ACPI 2.0 Features [No] Use the ACPI 2.0 Features option to enable the ACPI (Advanced Configuration and Power Interface) features.
  • Page 111 "SCI IRQ" interrupt event. Flag report is sent to the ACPI OS when there is a "SCI IRQ" interrupt event is made via the APIC. Pointers to the AMI OEMB table are not provided in the RSDT and the XSDT ACNODES ® Corp.
  • Page 112 Î Enabled EFAULT Î Headless Mode [Disabled] Use the Headless Mode option to update the ACPI FACP (Fixed ACPI Description Table) to indicate headless operations, i.e. a computer without a monitor, keyboard and mouse. Î Disabled EFAULT Enabled Pointers to the AMI OEMB table are provided in the RSDT and the XSDT The FACP is not updated to indicate headless mode The FACP is updated to indicate headless mode...

  • Page 113: Mps Configuration

    Use the Remote Access Configuration menu to configure remote access parameters. The Remote Access Configuration is an AMIBIOS feature and allows a remote host running a terminal program to display and configure the BIOS settings. Page 110 ACNODES ® Corp.
  • Page 114 Î Remote Access [Disabled] Use the Remote Access option to enable or disable access to the remote functionalities of the system. Î Disabled EFAULT Î Enabled Remote access is disabled. Remote access configuration options shown below appear: Î Serial Port Number Î...

  • Page 115: Usb Configuration

    USB Devices Enabled The USB Devices Enabled field lists the USB devices that are enabled on the system Î USB Function [8 USB Ports] Use the USB Function BIOS option to select USB function support. Page 112 ACNODES ® Corp.
  • Page 116 Î Disabled Î 2 USB Ports 4 USB Ports 6 USB Ports USB Ports EFAULT Î Legacy USB Support [Disabled] Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support. Normally if this option is not enabled, any attached USB mouse or USB keyboard does not become available until a USB compatible operating system is fully booted with all USB drivers loaded.

  • Page 117: Pci/Pnp

    BIOS Menu 14: PCI/PnP Configuration Î Plug & Play O/S [No] Use the Plug & Play O/S BIOS option to specify whether system plug and play devices are configured by the operating system or the BIOS. Page 114 ACNODES ® Corp.
  • Page 118 Î If the operating system does not meet the Plug and Play EFAULT specifications, this option allows the BIOS to configure all the devices in the system. Î This setting allows the operating system to change the interrupt, I/O, and DMA settings. Set this option if the system is running Plug and Play aware operating systems.
  • Page 119 The location of the Off Board PCI IDE adapter card is automatically detected by the AMIBIOS. PCI Slot 1 is selected as the location of the OffBoard PCI IDE adapter card. Only select this slot if the adapter card is installed in PCI Slot 1. ACNODES ® Corp.
  • Page 120 Î PCI Slot 2 Î PCI Slot 3 Î PCI Slot 4 Î PCI Slot 5 Î PCI Slot 6 Î IRQ# [Available] Use the IRQ# address to specify what IRQs can be assigned to a particular peripheral device. Î Available EFAULT Î...
  • Page 121 211 DM Channel 3 212 DM Channel 5 213 DM Channel 6 214 DM Channel 7 Page 118 The specified DMA is available to be used by PCI/PnP devices The specified DMA is reserved for use by Legacy ISA devices ACNODES ® Corp.
  • Page 122 Î Reserved Memory Size [Disabled] Use the Reserved Memory Size BIOS option to specify the amount of memory that should be reserved for legacy ISA devices. Î Disabled EFAULT Î Î Î No memory block reserved for legacy ISA devices 16KB reserved for legacy ISA devices 32KB reserved for legacy ISA devices 64KB reserved for legacy ISA devices...

  • Page 123: Boot

    PC 5170 Flat Panel PC 5.5 Boot Use the Boot menu (BIOS Menu 15) to configure system boot options. BIOS Menu 15: Boot Page 120 ACNODES ® Corp.

  • Page 124: Boot Settings Configuration

    5.5.1 Boot Settings Configuration Use the Boot Settings Configuration menu (BIOS Menu 16) to configure advanced system boot options. BIOS Menu 16: Boot Settings Configuration Î Quick Boot [Enabled] Use the Quick Boot BIOS option to make the computer speed up the boot process. Î...
  • Page 125 Use the PS/2 Mouse Support option adjusts PS/2 mouse support capabilities. Page 122 Normal POST messages displayed OEM Logo displayed instead of POST messages The system forces third party BIOS to display EFAULT during system boot. The system displays normal information during system boot. ACNODES ® Corp.

  • Page 126: Boot Device Priority

    Î Disabled Î Enabled Î Auto EFAULT 5.5.2 Boot Device Priority Use the Boot Device Priority menu (BIOS Menu 17) to specify the boot sequence from the available devices. Possible boot devices may include: 215 1 FLOPPY DRIVE 216 HDD 217 CD/DVD BIOS Menu 17: Boot Device Priority Setting PS/2 mouse support is disabled and prevented from...

  • Page 127: Removable Drives

    FDDs is shown. Select the first FDD the system boots from. If the “1st Drive” is not used for booting this option may be disabled. BIOS Menu 18: Removable Drives Page 124 [1st FLOPPY DRIVE] ACNODES ® Corp.

  • Page 128: Security

    5.6 Security Use the Security menu (BIOS Menu 19) to set system and user passwords. BIOS Menu 19: Security Î Change Supervisor Password Use the Change Supervisor Password to set or change a supervisor password. The default for this option is Not Installed. If a supervisor password must be installed, select this field and enter the password.

  • Page 129: Chipset

    Use the Chipset menu (BIOS Menu 20) to access the NorthBridge and SouthBridge configuration menus WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction. BIOS Menu 20: Chipset Page 126 ACNODES ® Corp.

  • Page 130: Northbridge Configuration

    5.7.1 NorthBridge Configuration Use the NorthBridge Configuration menu (BIOS Menu 21) to configure the northbridge chipset. BIOS Menu 21: NorthBridge Chipset Configuration Î DRAM Frequency [Auto] Use the DRAM Frequency option to specify the DRAM frequency or allow the system to automatically detect the DRAM frequency.
  • Page 131 DRAM timing parameters are manually set using the DRAM sub-items DRAM timing parameter are set according to the DRAM Serial Presence Detect (SPD) Memory is not reserved for ISA expansion cards Between 15MB and 16MB of memory is reserved for ISA expansion cards ACNODES ® Corp.
  • Page 132 Î Init. Graphic Adapter Priority [PCI/Int-VGA] The Init. Graphic Adapter Priority option selects the graphics controller the system uses as a primary boot device. The options are: 223 Internal VGA 224 PCI/Int-VGA Î Internal Graphics Mode Select [Enable, 8MB] Use the Internal Graphic Mode Select option to specify the amount of system memory that can be used by the Internal graphics device.
  • Page 133 Use the Flat Panel Type option to select the type of flat panel connected to the system. Configuration options are listed below. 228 640x480 229 800x600 230 1024x768 24bits 231 1280x1024 232 1400x1050 233 1024x768 18bits 234 1600x1200 48bits 235 800x600 24bits 236 800x600 18bits 237 1024x768 36bits Page 130 EFAULT EFAULT ACNODES ® Corp.

  • Page 134: Southbridge Configuration

    5.7.2 SouthBridge Configuration The SouthBridge Configuration menu (BIOS Menu 22) the southbridge chipset to be configured. BIOS Menu 22: SouthBridge Chipset Configuration Î OnBoard AC97 Audio [Auto] Use the OnBoard AC97 Audio option to enable or disable the AC’97 CODEC. Î...

  • Page 135: Power

    If this option is disabled, the only other option on the screen is the Power Button Mode. Î Disabled Î Enabled EFAULT Page 132 Disables the Advanced Power Management (APM) feature Enables the APM feature ACNODES ® Corp.
  • Page 136 Î Video Power Down Mode [Suspend] The Video Power Down Mode BIOS option specifies in what system mode the video device can be turned off. Î Disabled Î Standby Î Suspend EFAULT Î Hard Disk Power Down Mode [Suspend] The Hard Disk Power Down Mode BIOS specifies in what system mode the hard disk device can be turned off.
  • Page 137 Use the Power Button Mode BIOS to specify how the power button functions. Î On/Off EFAULT Î Suspend Page 134 Default When the power button is pressed the system is either turned on or off When the power button is pressed the system goes into suspend mode ACNODES ® Corp.
  • Page 138 Î Restore on AC Power Loss [Last State] Use the Restore on AC Power Loss option to specify what state the system returns to if there is a sudden loss of power to the system. Î Power Off Î Power On Î...

  • Page 139: Exit

    If selected, the following appears with values that can be selected: Î RTC Alarm Date (Days) Î System Time After setting the alarm, the computer turns itself on from a suspend state when the alarm goes off. ACNODES ® Corp.
  • Page 140 Î Save Changes and Exit Use the Save Changes and Exit option to save the changes made to the BIOS options and to exit the BIOS configuration setup program. Î Discard Changes and Exit Use the Discard Changes and Exit option to exit the BIOS configuration setup program without saving the changes made to the system.
  • Page 141 PC 5170 Flat Panel PC THIS PAGE IS INTENTIONALLY LEFT BLANK Page 138 ACNODES ® Corp.

  • Page 142: Aacnodes Panel Pc Product Line

    PC 5170 Flat Panel PC Appendix A ACNODES Panel PC Product Line...
  • Page 143 Page 139...

  • Page 144: Acnodes Panel Pc Products

    ACNODES panel PC products come fully kitted with high-performance motherboards, CPUs, power supply units and a ACNODES panel PC products are designed for ease of use and easy installation. This appendix introduces the full range of ACNODES panel PC products.
  • Page 145 Model PPC-2706GS LCD Size 6.5” TFT LCD Max. Resolution 640 x 480 Brightness 400 cd/m2 LCD Color 262K Viewing Angle 120/100 Backlight MTBF 50000hrs SBC Model WAFER-LX800 AMD LX800 1 x DDR 333/400MHz SO DIMM socket up to I/O Ports 1 x RS-232 2 x USB 2.0 1 x PS/2...

  • Page 146: A.2.2 Ppc-37 Series Panel Pc Solutions

    1 x PS/2 1 x PS/2 1 x LPT 1 x LPT 1 x VGA out 1 x VGA out 1 x LAN 1 x LAN 3 x Audio 3 x Audio 1 x IDE 1 x IDE ACNODES ® Corp.
  • Page 147 Model PPC-3708GS 2 x SATA CF Type II Expansion Slot HDD Drive Bay 1 x 2.5” SATA/IDE HDD FDD Drive Bay CD-ROM Drive Bay Power Supply 80W/55W AC Adapter Mounting Stand/Rack/ Wall/Panel/ Dimension 244 x 178 x (WxDxH) mm 75.2 Weight 2.2/4.4kg Front Panel...

  • Page 148: Series Panel Pc Solutions

    CF Type II CF Type II 1 x PCI 1 x PCI 1 x 2.5” SATA/IDE HDD 1 x 2.5” SATA/IDE HDD w/ Anti-Shock or 2 x 2.5” w/ Anti-Shock or 2 x 2.5” SATA/IDE HDD SATA/IDE HDD ACNODES ® Corp.

  • Page 149: Series Panel Pc Solutions

    Model PPC-5150GS w/o Anti-Shock FDD Drive Bay 1 x Slim FDD CD-ROM 1 x Slim CD-ROM Drive Bay Power Supply 180W ATX Power Mounting Stand/Rack/ Wall/Panel/Arm Dimension 410 x 309 x 110 (WxDxH) mm Weight 7/11kg Front Panel IP 65 compliant Protection Touch Screen Resistive Type 5-wire...
  • Page 150 1 x Slim FDD 1 x Slim CD-ROM 1 x Slim CD-ROM 250W ATX Power 250W ATX Power Stand/Rack/ Stand/Rack/ Wall/Panel/Arm Wall/Panel/Arm IP 65 compliant IP 65 compliant Resistive Type 5-wire Resistive Type 5-wire with RS-232 Interface with RS-232 Interface ACNODES ® Corp.

  • Page 151: A.2.5 Ppc-53 Series Panel Pc Solutions

    A.2.5 PPC-53 Series Panel PC Solutions All the models listed in the table below support Intel Pentium® M / Celeron ® M / ULV Celeron® M 1GHz/800MHz CPUs. Model PPC-5350GS LCD Size 15” TFT LCD Max. Resolution 1024 x 786 Brightness 350 cd/m2 LCD Color...
  • Page 152 150W ATX Power Mounting Stand/Rack/ Wall/Panel/Arm Dimension (WxDxH) mm 410 x 309 x 110 Weight 8/12kg Front Panel Protection IP 65 compliant Touch Screen Resistive Type 5-wire with RS-232 Interface Table A-5: PPC-53 Series Panel PC Solutions Page 148 ACNODES ® Corp.

  • Page 153: Binterface Connectors

    PC 5170 Flat Panel PC Appendix B Interface Connectors Page 149...

  • Page 154: Floppy Disk Drive Connector

    The PC 5170 flat panel PC EMBEDDED motherboard comes with a number of peripheral interface connectors and configuration jumpers listed in Chapter 2. The pinouts for these connectors are listed below. B.1 Floppy Disk Drive Connector EMBEDDED board is equipped with a 34-pin daisy-chain driver connector cable.

  • Page 155: Pci E-Ide Disk Drive Connector

    B.2 PCI E-IDE Disk Drive Connector Four IDE (Integrated Device Electronics) hard disk drives can be attached to the EMBEDDED IDE controller. IDE1, IDE2: Primary, Secondary IDE Connector Description RESET# DATA 7 DATA 6 DATA 5 DATA 4 DATA 3 DATA 2 DATA 1 DATA 0...

  • Page 156: Parallel Port

    The EMBEDDED offers six high speed NS16C550 compatible UARTs with Read/Receive byte FIFO serial port (COM1/COM2/COM3/COM4/COM5/COM6) COM1: Serial Port 2x5 pin header Connector Description Page 152 PC 5170 Flat Panel PC Description DATA 0 DATA 2 DATA 4 DATA 6...
  • Page 157 CN20A: Serial Port DB-9 Male Connector (COM1) Description DATA CARRIER DETECT (DCD) RECEIVE DATA (RXD) TRANSMIT DATA (TXD) DATA TERMINAL READY (DTR) GROUND (GND) DATA SET READY (DSR) REQUEST TO SEND (RTS) CLEAR TO SEND (CTS) RING INDICATOR (RI) COM2: Serial Port 2 x 5 Pin Header Connector COM2 Support three modes: RS-232, RS-422 and RS-485 (via 2 x 5 pin box header connector).
  • Page 158 RS-485 Mode Description RTX- RTX+ CN20B: Serial Port DB-9 Male Connector (COM2) COM2 supports three modes: RS-232, RS-422 and RS-485 (via DB-9 Connector). RS-232 Mode Description RS-422 Mode Description TXD- TXD+ Page 154 Description Voltage Description Description Voltage ACNODES ® Corp.
  • Page 159 RS-485 Mode Description RTX- RTX+ COM3: Serial Port 2x5 Pin Header Connector Description COM4: Serial Port 2x5 Pin Header Connector Description Description Voltage Description Description Page 155...

  • Page 160: Onnector

    GROUND (GND) DATA SET READY (DSR) REQUEST TO SEND (RTS) CLEAR TO SEND (CTS) RING INDICATOR (RI) COM5: Serial Port 2x5 Pin Header Connector Description COM6: Serial Port 2x5 Pin Header Connector Description Page 156 Description Description ACNODES ® Corp.

  • Page 161: Keyboard / Mouse Connector

    B.5 Keyboard / Mouse Connector The EMBEDDED provides one keyboard and one mouse box header connector, as well as external PS/2 keyboard and mouse connectors. CN23A (Purple): Extended Keyboard 6-pin Mini Din Connector Description KB DATA KB CLOCK CN23B (Green): Extended Mouse 6-pin Mini Din Connector Description MS DATA MS CLOCK...

  • Page 162: External Switches And Indicators

    Description MS CLOCK MS DATA B.6 External Switches and Indicators CN8: Multi Panel Description SPEAKER RESET SW IDE LED - IDE LED+ ATX POWER BUTTON Page 158 Description POWER-VCC KEYLOCK ATX POWER CONTROL ATX 5VSB ATX 5VSB ACNODES ® Corp.

  • Page 163: Usb Port Connector

    B.7 USB Port Connector The EMBEDDED has eight built-in USB ports for the future I/O bus expansion. CN26, CN27, CN28: 8-PIN Header USB Connectors Description USBD0- USBD0+ CN25: 2 External USB Connectors Description USBD0- USBD0+ Page 159...

  • Page 164: Irda Infrared Interface Port

    Amplitude Shift Keyed IR (ASKIR) interfaces. or ASKIR model in the Peripheral Setup COM2 in BIOS. COM2 will be disabled. IR1: IrDA Connector Description IR-RX IR-TX Page 160 To use the IrDA port, configure the FIR Then the normal RS-232 ACNODES ® Corp.

  • Page 165: Vga Connector

    B.9 VGA Connector The EMBEDDED provides one DB-15 female connector and one built-in 10-pin VGA box header connector that can be connected directly to a monochrome CRT monitor as well as high resolution color CRT monitor. VGA1: DB-15 Female VGA Connector Description BLUE HSYNC...

  • Page 166: Lan Rj45 Connector

    BIOS. These connectors can supply 12V/500mA to the cooling fans. FAN1: CPU Fan Connector Description Linear control Fan Sensor Page 162 PC 5170 Flat Panel PC Description N/C (or MDX2-) RX- (or MDX1-) N/C (or MDX3+) N/C (or MDX3-) MDX2- MDX1-...
  • Page 167 FAN2: System Fan Connector Description +12V Fan Sensor FAN3: System Fan Connector Description +12V Fan Sensor B.12 Inverter (LCD Backlight) Connector CN12: Inverter (LCD Backlight) Connector Description +12V ENABKL Description Page 163...
  • Page 168 The EMBEDDED provides up to 48-bit color TFT LCD. CN30: DF13-30DP-1.25 LVDS Interface Connector Description CLK1P CLK2P LCD_VDD LCD_VDD B.14 Audio Connectors CN7: Audio CD IN (2.54mm) Description CD IN_L Page 164 Description CLK1M CLK2M LCD_VDD LCD_VDD Description CD IN_R ACNODES ® Corp.
  • Page 169 CN2: Audio LINE OUT (2.54mm) Description LINEOUT_L CN24: Audio Jack Color Description MIC IN BLUE LINE IN GREEN SPEAK OUT B.15 Digital Input / Output CN6: Digital Input / Output Description Output 3 Output 1 Input 3 Input 1 Description LINE OUT_R Description Output 2...
  • Page 170 CF1: Compact Flash TYPE II Socket PIN Assignment Description GROUND CS1# GROUND CARD DETECT2 Page 166 Description CARD DETECT1 CS3# IOR# IOW# OBLIGATORY TO PULL HIGH IRQ15 MASTER/SLAVE RESET# IORDY OBLIGATORY TO PULL HIGH ACTIVE# PDIAG# GROUND ACNODES ® Corp.
  • Page 171 B.17 ATX Power Connector PW2 is a 20-pin ATX power supply connector with the following pin assignments. PW2: ATX Power Supply Connector Description 3.3V -12V PS-ON B.18 ATX 12V Power Connector This connector supports ATX power. Functions such as modem Ring on, wake-up LAN and soft power off are supported.
  • Page 172 Use ACNODES’s special ATX power connector cable for connection to a power supply if the power supply doesn’t have a suitable ATX connector cable.

  • Page 173: Bios Configuration

    PC 5170 Flat Panel PC Appendix C BIOS Configuration Options Page 169...
  • Page 174 C.1 BIOS Configuration Options Below is a list of BIOS configuration options described in Chapter 5. Î System Overview ...84 Î System Time [xx:xx:xx] ...85 Î System Date [xx/xx/xx] ...85 Î Max CUPID Value Limit [Disabled] ...88 Î Hyper Threading Technology [Disabled] ...88 Î...
  • Page 175 Page 170 ACNODES ® Corp.
  • Page 176 Î Parallel Port Mode [Normal]... 100 Î Parallel Port IRQ [IRQ7]... 100 Î Digital I/O Address [280h] ... 101 Î Serial Port3 Address [3E8]... 101 Î Serial Port3 IRQ [11] ... 101 Î Serial Port4 Address [2E8]... 102 Î Serial Port4 IRQ [10] ... 102 Î...
  • Page 177 PC 5170 Flat Panel PC Î PCI Latency Timer [64] ... 115 Î Allocate IRQ to PCI VGA [Yes] ... 115 Î Palette Snooping [Disabled] ... 116 Î PCI IDE BusMaster [Disabled] ... 116 Î OffBoard PCI/ISA IDE Card [Auto] ... 116 Î...
  • Page 178 PC 5170 Flat Panel PC Î Resume on PME# [Disabled] ... 135 Î Resume On RTC Alarm [Disabled]... 135 Î RTC Alarm Date (Days) ... 136 Î System Time ... 136 Î Save Changes and Exit ... 137 Î Discard Changes and Exit ... 137 Î...
  • Page 179 PC 5170 Flat Panel PC THIS PAGE IS INTENTIONALLY LEFT BLANK Page 174 ACNODES ® Corp.

  • Page 180: Software Drivers

    PC 5170 Flat Panel PC Appendix D Software Drivers Page 175...
  • Page 181 D.2 Driver Installation To install the touch panel software driver, please follow the steps below. Insert the driver CD that came with the PC 5170 into the CD drive. Step 1: Once the CD drive is installed, the screen in Figure D-1 appears.
  • Page 182 Figure D-1: Driver CD Pop Up Screen Select the operating system installed on the system from the menu on the left Step 3: side of the screen. NOTE: The following description is for driver installation using a Windows 2000 OS. If a different OS is installed, please refer to the driver user manual for the relevant OS.
  • Page 183 Figure D-3: Welcome Screen To continue the installation process click N Step 6: An Install PS/2 interface driver screen appears (Figure D-4). It is not Step 7: necessary to install the PS/2 interface driver. To continue click N Page 178 ACNODES ® Corp.
  • Page 184 Figure D-4: Install PS/2 Interface Driver Step 8: Four point calibration options are then selected. Four point calibrations can be done every time a user boots up, during the next time the system boots or never. Select when a four-point calibration should be done. Click N to continue.
  • Page 185 Step 10: The user is then prompted to select a file directory in which the touch kit controller is installed (Figure D-7). The default directory is “C:\Program Files\TouchKit.” If a different folder must be used, select browse and then select the folder. Once the folder is selected, click Next to continue. Page 180 ACNODES ® Corp.
  • Page 186 Figure D-7: Controller Installation Directory Step 11: The user is then prompted to select a file directory in which the program icons are saved (Figure D-8). The default folder is “TouchKit.” If a different folder must be used, select a folder from the list shown. Once the folder is selected, click to continue.
  • Page 187 PC 5170 Flat Panel PC Figure D-8: Program Icon Directory Step 12: The program then starts installing (Figure D-9). Figure D-9: Installing Page 182 ACNODES ® Corp.
  • Page 188 Step 13: Once the program is finished installing, the user is prompted to restart the computer now or to restart the computer later (Figure D-10). Select when the computer should be restarted and click F procedure. Figure D-10: Installation Complete D.3 Touch Panel Driver Configuration To configure the touch panel driver options, refer to the TouchKit user manual located on the driver installation CD.
  • Page 189 PC 5170 Flat Panel PC THIS PAGE IS INTENTIONALLY LEFT BLANK Page 184 ACNODES ® Corp.
  • Page 190 PC 5170 Flat Panel PC E Index Page 185...
  • Page 191 Internal Peripheral Device Connectors ...38 Internal Slots ...38 Inverter (LCD Backlight) Connector... 163 IrDA Infrared Interface Port ... 160 Jumper Settings ...44 Keyboard / Mouse Connector ... 157 Keyboard and Mouse Connection ...67 Keyboard and Mouse Power Setting ...50 ACNODES ® Corp.
  • Page 192 LAN RJ45 Connector...162 LCD Panel Connection ...66 LCD Panel LVDS Interface Connector ...164 LCD Voltage Setup ...50 Maintenance and Cleaning ...4 Model Variation ...20 Motherboard ...33 Motherboard Replacement ...70 Motherboard Specifications ...28 Northbridge ...34 Overview ...20 Packing List ...44 Panel Mounting...61 Parallel Port ...152 Parallel Port Connection ...67 PCI E-IDE Disk Drive Connector ...151...

Table of Contents