Î
Internal Graphics Mode Select [Enable, 8MB]
Use the Internal Graphic Mode Select option to specify the amount of system memory
that can be used by the Internal graphics device.
Î
Disable
Î
Enable, 1MB
Enable, 4MB
Enable, 8MB
Enable, 16MB
Î
Enable, 32MB
Î
Graphics Aperture Size [64MB]
The Graphics Aperture Size option selects the size of the AGP aperture. The aperture is
a portion of the PCI memory address range dedicated as graphics memory address
space.
Î
64MB
Î
128MB
Î
Boot Display Device [CRT+LFP]
Use the Boot Display Device option to select the display device used by the system
when it boots. Configuration options are listed below.
CRT
„
LFP
„
CRT+LFP
„
Î
Flat Panel Type [640x480]
Use the Flat Panel Type option to select the type of flat panel connected to the system.
Configuration options are listed below.
1MB of memory used by internal graphics device
4MB of memory used by internal graphics device
D
8MB of memory used by internal graphics device
EFAULT
16MB of memory used by internal graphics device
32MB of memory used by internal graphics device
D
Graphics aperture size set as 64MB
EFAULT
Graphics aperture size set as 128MB
D
EFAULT
PC 5150 Flat Panel PC
Î
Î
Î
117