Figure 3-8: Cd Drive Blank Plate Assembly; Figure 3-9: Cd Drive Blank Plate Assembly - Acnodes PC 5150 User Manual

Step 6: The CD drive blank plate assembly consists of a blank plate and two brackets
that attach the assembly to the chassis. The two brackets each have two screws
that attach them to the blank plate. Remove the four screws that attach the
brackets to the blank plate. Figure 3-8 shows the underside of the CD drive
blank plate assembly with the four screws to be removed.

Figure 3-8: CD Drive Blank Plate Assembly

Step 7: Attach the two brackets to a CD drive with the four retention screws in the
CD-ROM installation kit. Be sure to orient the brackets properly before attaching
them to the CD drive. Figure 3-9 shows two views of a CD drive with the
brackets attached and the proper retention screws to use.

Figure 3-9: CD Drive Blank Plate Assembly

WARNING!
The two screws (black M2*3) shown in the left image of Figure 3-9 are
different from the two screws (silver M2*2) shown in the right. Please
secure the correct screws into the CD drive according to the images shown
52
PC 5150 Flat Panel PC
ACNODES ® Corp.