Acnodes Panel PC 1000 User Manual

All-in-one 10.4” super slim panel pc
Hide thumbs Also See for Panel PC 1000:

Advertisement

PANEL PC 1000
All-in-One 10.4"
Super Slim PANEL PC
User's Manual

Advertisement

Table of Contents
loading

Summary of Contents for Acnodes Panel PC 1000

  • Page 1 PANEL PC 1000 All-in-One 10.4” Super Slim PANEL PC User’s Manual...
  • Page 2 Disclaimers The information in this manual has been carefully checked and is believed to be accurate. ACNODES assumes no responsibility for any infringements of patents or other rights of third parties, which may result from its use. ACNODES assumes no responsibility for any inaccuracies that may be contained in this document.
  • Page 3 !" CE Marking !" FCC Class A FCC Compliance This equipment has been tested and complies with the limits for a Class-A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 4: Safety Precautions

    Before getting started, read the following important cautions. 1. The PANEL PC 1000 does not come equipped with an operating system. An operating system must be loaded first before installing any software into the computer. 2. Be sure to ground yourself to prevent static charge when installing the internal components.
  • Page 5 Trademarks Acknowledgments ACNODES is a trademark of ACNODES Inc. ALI is a trademark of Acer Laboratories, Inc. AMD is a trademark of Advanced Micro Devices, Inc. AMI is a trademark of American Mega trends, Inc. Cyrix is a trademark of Cyrix Corporation.
  • Page 6 This page does not contain any information. This page does not contain any information. This page does not contain any information. This page does not contain any information.
  • Page 7: Table Of Contents

    Chapter 1 Introduction ------------------------------- 1 General Description ... 1 Specifications ... 2 Dimensions ... 4 I/O Outlets... 5 Utilities Supported ... 6 Chapter 2 System Configuration ------------------ 7 System Configuration ... 7 2.1.1 Front View ... 7 Panel Mount ... 8 Chapter 3 System Installation --------------------- 9 CPU ...10 DRAM ...10...
  • Page 8 This page does not contain any information. This page does not contain any information. This page does not contain any information. This page does not contain any information.
  • Page 9: Chapter 1 Introduction

    $" I/O Outlets $" Utilities Supported General Description The PANEL PC 1000 super slim industrial PANEL PCs are mainly designed for industrial automation and some space-constricted embedded applications. For some space-concerned industries, a traditional PC with a separate main system, display monitor and keyboard is simply not integrated enough.
  • Page 10: Specifications

    PANEL1000-370 All-in-One PANEL PC User’s Manual Specifications Core System for system board $" CPU: Intel Celeron 300 up to 733 MHz; Intel Pentium III 500 up to1.0Ghz $" System Chipset: Intel 440BX Core Logic Controller $" BIOS: Award BIOS, Y2K compliant 2Mbit Flash ROM, DMI, Plug and Play $"...
  • Page 11 PANEL PC 1000 All-in-One PANEL PC User’s Manual Built-in Peripherals $" Standard 100W power supply $" 2.5” Hard disk (540MB or up) $" 10.4” ELO anti-glare analog resistive touch screen with RS- 232 controller sharing COM3 $" System cooling fan...
  • Page 12: Dimensions

    PANEL1000-370 All-in-One PANEL PC User’s Manual Dimensions PANEL1000-370 10.4" FLAT PANEL PC (unit: mm) Introduction...
  • Page 13: I/O Outlets

    PANEL PC 1000 All-in-One PANEL PC User’s Manual I/O Outlets The following figure shows the I/O arrangement of the PANEL PC 1000. The backside of the chassis contains most of the connectors. 1. Ethernet RJ-45 phone jack 2. PS/2 mouse 3.
  • Page 14: Utilities Supported

    PANEL1000-370 All-in-One PANEL PC User’s Manual Utilities Supported %" Watchdog Utility Ethernet Utility %" %" VGA Drivers %" Touch screen Utility Introduction...
  • Page 15: Chapter 2 System Configuration

    PANEL PC 1000 All-in-One PANEL PC User’s Manual System Configuration This chapter details the system parts and components with figures. Sections include $" System Major Parts System Configuration 2.1.1 Front View The figure below shows the front views of PANEL PC1000.
  • Page 16: Panel Mount

    PANEL1000-370 All-in-One PANEL PC User’s Manual Panel Mount The PANEL PC 1000 is mainly designed for panel mount application. To mount the PANEL PC 1000, the standard set of mounting kit (included in the system packaging) is needed. Please refer to the following figure.
  • Page 17: Chapter 3 System Installation

    $" Parallel Port $" External FDD The PANEL PC 1000 has a Pentium III little board with a free PCI/ISA slot inside. It already builds in a Pentium III CPU, relevant DRAM and a 2.5” HDD. These are all standard and the system is ready to play.
  • Page 18: Cpu

    PANEL1000-370 All-in-One PANEL PC User’s Manual The standard PANEL PC 1000 system already builds in Pentium III-level CPU. When upgrading to a new CPU of the same level, follow the instructions below; 1. To remove the existing CPU requires the use of a chip puller.
  • Page 19: Hdd

    PANEL PC 1000 All-in-One PANEL PC User’s Manual The standard PANEL PC 1000 already builds in a 2.5” hard disk drive. If the user intends to remove the existing device for repair or for a higher-capacity one, then follow the installation instructions below.
  • Page 20: Serial Ports

    PANEL1000-370 All-in-One PANEL PC User’s Manual 4 x Serial Ports The PANEL PC 1000 provides four onboard serial ports installed on the bottom rear side of the chassis. Arrangements on PANEL PC 1000 specify COM1, COM2, COM3 providing RS-232 interface, and with its RS-422/485 interface connected to COM4.
  • Page 21: Parallel Port

    The printer interface is a 25-pin D-SUB connector. To connect any parallel device, just plug in the device connector to the 25-pin D-SUB. The PANEL PC 1000 has an analog RGB interface connector. It is able to connect to an expansion CRT monitor, and the system can display on both the flat panel and the CRT simultaneously.
  • Page 22: Digital I/Os

    PANEL1000-370 All-in-One PANEL PC User’s Manual Digital I/Os The PANEL PC 1000 provides a digital I/O of 4-channel inputs/outputs for simple automation control. For example, it can be used to control the opening and closing of the cash drawer on a POS system. It can also be used for UPS control.
  • Page 23: External Fdd

    PANEL PC 1000 All-in-One PANEL PC User’s Manual 3.11 External FDD The PANEL PC 1000 does not build in any floppy disk drive into the main system. Rather, it provides a FDD interface. An external FDD cable is provided to connect a standard 3.5” FDD to the system for system O/S and application software installation.
  • Page 24: Expansion Slot

    PANEL1000-370 All-in-One PANEL PC User’s Manual 3.12 Expansion Slot The PANEL PC 1000, this comes as a standard system feature. If the system comes with expansion capability, then the system includes a PCI/ISA expansion riser card to accommodate either an ISA or PCI device at a given time.
  • Page 25: System O/S And Software Installation

    PANEL PC 1000 All-in-One PANEL PC User’s Manual 3.13 System O/S and Software Installation The PANEL PC 1000 is not equipped with any operating system. It builds in a 2.5” HDD and 1.5MB Solid State Disk as memory storage device. As both devices are built in the system chassis, to load any O/S or application software into the computer, an external device is needed to act as a bridge.
  • Page 26 PANEL1000-370 All-in-One PANEL PC User’s Manual This page does not contain any information. This page does not contain any information. This page does not contain any information. This page does not contain any information. System Installation...
  • Page 27: Appendix A Power Supply Specifications

    Standard AC Power Supplies PANEL PC 1000 Power Supply The power supply used in the PANEL PC 1000 is a 100W open frame power supply. The specifications and features of this special power supply are listed in the following sections.
  • Page 28 PANEL1000-370 All-in-One PANEL PC User’s Manual General Specifications $" Efficiency: 86% typ. Environmental Specifications $" Operating temperature range: 0 C to 40 C $" Storage temperature range -40 C to +85 C $" Humidity, non-condensing: 5% ~ 95% $" Altitude: 0 to 10,000 feet International Standards Safety Standards $"...
  • Page 29: Optional Dc Power Supplies

    PANEL PC 1000 All-in-One PANEL PC User’s Manual Optional DC Power Supplies +12V DC Power Supply Input Specifications $" Input voltage range: +9V Input current: 10A at +12V $" Output Specifications $" Load Range: Min. Load Output +12V -12V The output range of +12V, -12V and down with +5V setting.
  • Page 30 PANEL1000-370 All-in-One PANEL PC User’s Manual General Features $" Efficiency: The efficiency is 70% typical while measuring at nominal line and rated load. Protection: $" For some reason the power supply fails to control itself, the built-in over-voltage protection circuit will shut down the outputs to prevent damage to external circuits.
  • Page 31 PANEL PC 1000 All-in-One PANEL PC User’s Manual (II) +24V DC Power Supply Input Specifications $" Input voltage range: +18V $" Input current: 5A at +24V Output Specifications $" Load Range: Min. Load Output +12V -12V The output range of +12V, -12V and down with +5V setting.
  • Page 32 PANEL1000-370 All-in-One PANEL PC User’s Manual General Features $" Efficiency: The efficiency is 75% typical while measuring at nominal line and rated load. Protection: $" For some reason the power supply fails to control itself, the built-in overvoltage protection circuit will shut down the outputs to prevent damage to external circuits.
  • Page 33 PANEL PC 1000 All-in-One PANEL PC User’s Manual (III) +48V DC Power Supply Input Specifications $" Input voltage range: +36V $" Input current: 3A at +48V Output Specifications $" Load Range: Min. Load Output +12V -12V At factory, all outputs in 60% rated load conditions, the +5V output is set to between 4.95V and 5.05V, and the...
  • Page 34 PANEL1000-370 All-in-One PANEL PC User’s Manual General Features $" Efficiency: The efficiency is 75% typical while measuring at nominal line and rated load. Protection: $" For some reason the power supply fails to control itself, the built-in over-voltage protection circuit will shut down the outputs to prevent damage to external circuits.

Table of Contents