Figure 3-18: Secure The Rack/Cabinet Bracket - Acnodes PC 5150 User Manual

follow the steps below.
Step 1: The back of the aluminum frame surrounding the PC 5150 Flat panel PC
has 12 retention screw holes for a cabinet/rack installation bracket.
NOTE:
When purchasing the cabinet/rack installation bracket make sure it is
compatible with both the PC 5150 Flat panel PC and the rack/cabinet into
which the PC 5150is installed.
Step 2: Slide the PC 5150through the rack/cabinet bracket until the rear side of the
PC 5150frame is flush against the front of the bracket.
Step 3: Make sure the retention screw holes at the rear of the PC 5150frame are
aligned with the retention screw holes in the rack/cabinet bracket.
Step 4: Secure the rack/cabinet bracket to the PC 5150 Flat panel PC by inserting
and tightening 12 retention screws. (See Figure 3-18)

Figure 3-18: Secure the Rack/Cabinet Bracket

60
PC 5150 Flat Panel PC
ACNODES ® Corp.