Mounting The System; Wall Mounting - Acnodes PC 5170 User Manual

3.7 Mounting the System

WARNING!
When mounting the PC 5170 flat panel PC onto an arm, wall or into a
panel, it is advisable to have more than one person help with the
installation to prevent accidental damage to the panel and avoid personal
injury.
The four methods of mounting the PC 5170 are:

125 Wall mounting

126 Panel mounting
127 Arm mounting
128 Rack mounting
The four mounting methods are fully described below.
3.7.1 Wall Mounting
To mount the PC 5170 flat panel PC onto a wall, please follow the steps below.
Step 1:
Select the location on the wall for the wall-mounting bracket.
Step 2:
Carefully mark the locations of the four bracket screw holes on the wall.
Step 3:
Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Align the wall-mounting bracket screw holes with the pilot holes.
Step 4:
Secure the mounting-bracket to the wall by inserting the retention screws into
Step 5:
the four pilot holes and tightening them (see Figure 3-11).
Page 58
PC 5170 Flat Panel PC
ACNODES ® Corp.