Packing List; Jumper Settings - Acnodes PC 5150 User Manual

3.4.1 Packing List

The PC 5150 Flat panel PC is shipped with the following components:
1 x Carton
„
1 x Power cord
„
1 x Screw kit
„
1 x HDD IDE cable (44 pin + 2 x 40 pin)
„
1 x HDD IDE cable (44 pin + 40 pin)
„
1 x HDD SATA cable
„
1 x Driver CD
„
1 x CPU cooler
„
1 x CD drive installation kit
„
1 x FDD installation kit
„
1 x HDD bracket
„
10 x Jumper clips
„
1 x Wall-mounting kit
„
1 x Panel-mounting kit
„
1 x Touch screen driver CD (T-R model only)
„
1 x Touch pen (T-R model only)
„

3.5 Jumper Settings

NOTE:
These jumper settings and the jumper locations are described in detail in
the User Manual that came with the EMBEDED motherboard. Please
refer to this manual for a more detailed understanding of the jumper
settings
NOTE:
A jumper is a metal bridge that is used to close an electrical circuit.
consists of two metal pins and a small metal clip (often protected by a plastic
cover) that slides over the pins to connect them.
PC 5150 Flat Panel PC
It
To CLOSE/SHORT a