Î
Host & Device
Î
Host
Î
Device
Î
IDE Master and IDE Slave
When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
Primary IDE Master
„
Primary IDE Slave
„
Secondary IDE Master
„
Secondary IDE Slave
„
Third IDE Master
„
Fourth IDE Master
„
The IDE Configuration menu (BIOS Menu 4) allows changes to the configurations for the
IDE devices installed in the system. If an IDE device is detected, and one of the above
listed four BIOS configuration options are selected, the IDE configuration options shown in
Section 5.3.2.1 appear.
5.3.2.1 IDE Master, IDE Slave
Use the IDE Master and IDE Slave configuration menu to view both primary and
secondary IDE device details and configure the IDE devices connected to the system.
82
D
Both the motherboard onboard IDE controller and
EFAULT
IDE disk drive are used to detect the type of IDE
cable used.
The motherboard onboard IDE controller detects
the type of IDE cable used.
The IDE disk drive to detects the type of IDE cable
used.
PC 5150 Flat Panel PC
ACNODES ® Corp.