Î
Yes
D
Î
No
Î
P-ATA Channel Selection [Both]
Use P-ATA Channel Selection option to select the active IDE channels.
Î
Primary
Î
Secondary
Î
Both
Î
S-ATA Ports Definition [PO-3
Use S-ATA Ports Definition option to select the physical ports for S-ATA.
Î
PO-3rd./P1-4th.
Î
PO-4th. /P1-3rd.
Î
Configure S-ATA as RAID [No]
The Configure S-ATA as RAID option can only be selected if the IDE Configuration
option is set to "P-ATA Only". Use Configure S-ATA as RAID option to configure the
S-ATA interface as RAID.
Î
No
D
Î
Yes
80
The S-ATA interface is running in enhanced mode.
EFAULT
The S-ATA interface is running in legacy mode.
The primary P-ATA channel is set to be the active IDE
channel.
The secondary P-ATA channel is set to be the active
IDE channel.
D
The primary and secondary P-ATA channel are both
EFAULT
set to be the active IDE channels.
rd
th
./P1-4
.]
D
Set the physical ports (PO/PI) to be 3
EFAULT
Set the physical ports (PO/PI) to be 4
The S-ATA interface cannot be configured as RAID drive.
EFAULT
The S-ATA interface can be configured as RAID drive.
PC 5150 Flat Panel PC
rd
./4
th
rd
./3
ACNODES ® Corp.
th
.
.