FPC 8059 User's Manual
2.4
Ethernet
The FPC 8059 provides an NE2000 compatible Ethernet (RJ-45)
interface. For network connection, just plug in one cable end of the
FPC 8059 10/100 Base-T Hub into the standard RJ-45 connector.
The pin assignment of the RJ-45 is listed below;
Pin
TX+ (Data transmission positive
1
TX- (Data transmission negative)
2
Rx+(Data reception positive)
3
RJ45 termination
4
RJ45 termination
5
Rx- (Data reception negative)
6
RJ45 termination
7
RJ45 termination
8
2.5 Mounting Way : Panel mount
The FPC 8059 is designed for panel mount application. To mount
the FPC 8059, the standard set of mounting kit (included in the
system packaging) is needed.
12
Signal
1 2 3 4 5 6 7 8
RJ-45
Hardware Installation