Acnodes PC 5150 User Manual page 72

chassis. Remove the plastic tie.
Step 7: Bundle the cables of the new PSU module, and secure them with a plastic tie, in
a way similar to the old PSU module.
Step 8: Before inserting the new PSU module into the chassis, reconnect the PSU
module connectors to the motherboard power connector (PW1 and PW2).
Step 9: Place the new PSU module into the PC 5150 Flat panel PC.
Step 10: Secure the new PSU module to the PC 5150 Flat panel PC by reinserting the
two retention screws into the metal plate behind the 15" TFT LCD screen and
the two retention screws through the bottom panel of the PC 5150 Flat panel
PC.
Step 11: Reattach the elevated platform removed in Step 2.
Step 12: Replace the back cover.
70
PC 5150 Flat Panel PC
ACNODES ® Corp.